Feasa LED壽命測試儀加速了LED從-65°C到125°C的測試和檢驗。用于測試的光纖已經經過了很的挑選，可以在-65°C to +125°C的溫度下進行使用。Fease光學頭材料也是經過精挑細選的，使其能夠承受限溫度。當壽命測試儀在進行運行時，測試儀置于烤箱外面對LED進行連續檢測。

Feasa's LED Life Tter offers accelerated tting and monitoring of LEDs from -65°C to +125°C.The Fiber used in the tter has been specially seleed and prepared for use in temperatur of -65°C to +125°C. The Feasa Optical Heads have been digned from seleed materials to withstand extreme temperatur. The Tter sits outside the oven and the LEDs are monitored continuously during the Life Time Tt.

INTERFAC接口:

提供一個簡單方便的U接口到測試儀，不需要額外的外部供電，波特率460800。

Uoffers a very simple interface to the LED Analyser with no requirement for an additional power supply. Very high baud rat, up to 460800 baud, are available.

RS232接口易用于波特率為115200，需要一外部電源供電。

TheRS232 Serial Portis easy to use with a max baud rate of 115200. It requir the use of an external power supply.

多個LED測試儀可以使用Daisy Chain接口串聯，而使用一個U或者RS232接口連接到電腦，多可支持30個LED測試儀串聯。

Multiple LED Analysers can be conneed together using the Daisy Chain Conneors. Only one RS232 Serial Port or U Port is required to conne up to 30 LED Analysers.

TT SOFTWARE測試軟件：

測試軟件能在固定的時間間隔內連續不斷的對LED進行測試，在1秒和數小時之內的數據能及時存到硬盤，以備以后查看和繪制圖形。

The Tt Software has the ability to continuously tt LEDs at fixed time intervals. Between 1 second and multiple hours data can be saved to disk for later retrival, reporting and graphing of rults.

 測試軟件可以配置發送郵件，當測試出現錯誤和測試結束時發送一封郵件。

The Tt Software can be configured to send an email on error and also at the end of a tt sequence.

SPECIFICATIONS參數：

Model and Te型號：