Featur
Featur
- Halogen free, lead free and RoHS compliant for global applications
- Ultra-low capacitance (0.1pF tical) ideally suited for proteing high speed data applications
- Provid D proteion with fast rponse time (<1ns) allowing equipment to p the IEC 61000-4-2 Level 4 tt
- Four (4) channel array
- Zero signal distortion
- Low leakage current (<0.01μA tical)
Applications
Applied to a high speed signal interface, the 42510DA protes:
- Dial video equipment
- Mobile phone
- GPS Antenna
- Bluetooth communication equipment antenna circuit
- IEEE-1394
- DVI
- HDMI
Packaging
- Supplied in tape and reel packaging, 5000 parts per seven inch (178mm) reel per EIA Standard 481-1
Soldering Recommendations
- Compatible with lead and lead-free solder reflow procs
- Hand soldering - soldering tip should not direly touch part - 280°C max for 3 sec. max
- Peak reflow temperatur and durations:
- IR Reflow = 260°C max for 20 sec. max
- Wave Solder = 260°C max for 10 sec. max
Dign Considerations
- Follow the soldering recommendations to avoid deforming produ
- Do not use high temperature, high humidity or corrosive atmospher (sulfide and chloride gas) that could damage the solder ability
- Moisture Sensitivity Level (MSL) according to J-STD-020 standard: Level 2 (Floor Life 1 year under <30°C/65%RH conditions)
- Solder ability requirement according to /JEDEC J-STD-002C, Tt D, Tt B1
- Use Sn/Ag/Cu (96.5/3.0/0.5) or equivalent solder and aivated flux #5 or equivalent
Thermal Shock: -40°C to +85°C, 30 minute cycle, 5 cycl
Moisture Ristance Tt: J-STD-020 Standard: Level 2 (1 year floor life under 30°C/65%RH conditions)
Operating Temperature Range: -40°C to +85°C (-40°F to 185°F)
Storage Temperature Range: -55°C to +125°C (-67°F to +257°F)
D Voltage Capability, IEC 61000-4-2 Conta Discharge Mode: 8kV
D Voltage Capability, IEC 61000-4-2 Air Discharge Mode: 15kV
D Withstand Puls: 100 Tim Minimal
