買家須知：
1.所標價格為參考價，為節省時間，將同類產品同一標題列出，但價格并非統一，拍下前請聯系賣家。（注：店內產品均稅，可開普票，開票需加稅金）。另有大量庫存沒有上傳，如果您還沒有查到您想要的型號，請與我們聯系，我們可以為您研發制作偏冷門的電子元件。
2.電子元件是型的產品，技術含量較高，由于本身可能存在著多種品牌，后輟與封裝，所以可能導致參數與性能的差異，有不慎，很有可能導致元件購買錯誤(此種失誤，非質量問題！)，為了更好的解決您的問題，請您在購買我們?cè)?，將您所需產品的品牌、封裝、腳位及后綴告訴我們！以便我們能準確的發貨。為了保障您的利益，切勿直接拍下并付款?。?/span>
3.為避免運輸過程中造成貨物損壞或丟失給您帶來損失，請您在收到貨物時認真檢查，如有問題請勿簽收！時間與我取得聯系，共同解決問題。勿在簽收后提出數量不足，貨不對板的情況，謝謝合作！
DCRIPTION常州電磁式無源貼片蜂鳴器 D-090035H側發音 福鼎描 述
A. SCOPE
This specification appli magnetic buzzer, D-090035H-03627
B. SPECIFICATION
| . | Item | Unit | Specification | Condition |
1 | Oscillation Frequency | Hz | 2731 | Vo-p=1/2duty , square wave |
2 | Operating Voltage | Vo-p | 2.5 ~4.5 | |
3 | Rated Voltage | Vo-p | 3.6 | |
4 | Current Consumption | mA | MAX. 100 | at Rated Voltage |
5 | Sound Prsure Level | dB | MIN. 85 | at 10cm at Rated Voltage |
6 | Coil Ristance | Ω | 16±3 | |
7 | Operating Temperature | ℃ | -30 ~ +70 | |
8 | Storage Temperature | ℃ | -40 ~ +85 | |
9 | Dimension | mm | Φ9.0x H3.5 | See appearance drawing |
10 | Weight (MAX) | gram | 0.8 | |
11 | Housing Material | LCP( Black ) | ||
12 | Leading Pin | Tin Plated Br(Sn) | See appearance drawing | |
13 | Environmental | RoHS |
C. APPEARANCE DRAWING
Tol : ± 0.5 Unit: mm
D.TTING METHOD
Standard Measurement conditions
Temperature:25±2℃ Humidity:45-65%
Acoustic Characteristics:
The oscillation frequency, current consumption and sound prsure are measured by the measuring instruments shown below
In the measuring tt, buzzer is placed as follows:
E. Tical Frequency Rponse Curve
F. Recommend Driving Circuit 
The base current Ib should high eugh so that it saturat the collector current of the transistor with the CB load.
G. Soldering Condition
(1)Recommendable reflow soldering condition is as follows
(Reflow soldering is twice)
te:It is requted that reflow soldering should be executed after heat of product go down to rmal.
Heat ristant line
(Used when heat ristant reliability tt is performed)
(2)Manual soldering
Manual soldering temperature 350 ℃ within 5 sec.
H. RELIABILITY TT
. | ITEM | TT CONDITION AND REQUIREMENT |
1 | High Temperature | After being placed in a chamber with 85 |
2 | Low Temperature | After being Placed in a chamber with -40 |
3 | Humidity Tt | After being Placed in a chamber with 90-95% R.H. at 40 |
4 | Temperature Cycle | The part shall be subjected to 5 cycl. One cycle shall be consist of: |
5 | Drop Tt | Drop on a hard wood board of 4cm thick, any directions ,6 tim, at the height of 75cm . |
6 | Vibration Tt | After being applied vibration of amplitude of 1.5mm with 10 to 55 Hz band of vibration frequency to each of 3 perpendicular directions for 2 hours . |
7 | Solderability | Lead terminals are immersed in rosin for 5 seconds and then immersed in solder bath of +300 |
8 | Terminal Strength | The force of 9.8N(1.0kg) is applied to each terminal in axial direction for 10 seconds. |
TT CONDITION.
Standard Tt Condition : a) Temperature : +5 ~ +35℃ b) Humidity : 45-85% c) Prsure : 860-1060mbar
Judgment Tt Condition : a) Temperature : +25 ± 2℃ b) Humidity : 60-70% c) Prsure : 860-1060mbar
I. PACKING STANDARD
