PVC孔板用于氣體

產品介紹

The Series PE Orifice Plate Flowmeter offers one-piece PVC construction incorporating a unique holder or carrier ring containing metering taps and integral gaskets. Unlike a standard orifice plate, the Series PE is a true primary element including the various components for differential pressure measurement. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. The Series PE is available in line sizes from 1/2" to 24" and used for air and most gases. It meets or exceeds AE, AGA & ISO standards.

技術參數

介質：Clean air and compatible gases.

材質：Monolithic (single piece) constructed entirely of gray PVC, Buna-N gaskets.

：&plun;0.6% full scale flow. (Beta= .2-.6) &plun;0.7% for Beta greater than .6.

溫度：140°F (60°C) max.

壓力：150 psi (10 bar) max.

壓損：1 - Beta ratio², eg: 1 - 07² = 1 - 0.49 = 51% of the d.p.

尺寸：1/2" to 24".

連接：1/4" female NPT.

安裝：Standard flange 125#/150# rating.

管路：General requirements 10 diameter upstream and 5 diameter downstream.

重量：Varies with line size. See Catalog page.

選型：

1/2"到24"，請咨詢我司。