9m3汽車發動機驅動混凝土攪拌運輸罐 液壓傳動系統采用的國際原裝配件，罐體為當今優化設計雙螺旋線模具冷壓形成型三維葉片，抑制離析、攪拌均勻、耐長距離運輸。
| 通用配置及專項參數Whole Function & Technical Parameters | 攪動容積Mixing Volume (m3) | 8 / 9 | ||
| 液壓系統配置Driving Hydraulic System | 油泵Pump | 型號Model | 美國EATON,德國REXROTH,美國SAUER | |
| 工作壓力/排量Max working pressure/Output | 42Mpa / 90ml/rev | |||
| 馬達Motor | 型號Model | 美國EATON,德國REXROTH,美國SAUER | ||
| 工作壓力/排量Max working pressure/Output | 42Mpa / 90ml/rev | |||
| 減速器Decelerator | 型號Model | 意大利BONFIGLIOLI (Italy),德國LOSI (Germany),德國ZF (Germany) | ||
| 扭矩Torqve | 60000 Nm | |||
| 速比Speed Ratio | 100 | |||
| 冷卻Cooler | 型號/油箱容積Te / tank volume | 中國Chinese YS-18 /德國Germany AKG-25 | ||
| 攪拌筒專項參數Mixing Drum Technical Parameters | 攪拌筒幾何容積Geometric Volume (m3) | 14.6 /15.1 | ||
| 填充率Filling Rate(%) | 63 | |||
| 進料速度Speed of Charge-in(m3/min) | ≥3 | |||
| 出料速度Speed of Discharge(m3/min) | ≥2 | |||
| 剩余率Residual rate(%) | ﹤0.5 | |||
| 攪拌轉速Speed of Aator(r/min) | 0-16 | |||
| 拌筒傾斜度 | 1-15° | |||
| 混凝土坍落度Land-slide Degree | 70-260mm | |||
| 筒體材料Marterial of Tank Body | B520J鋼板Wearable steel | |||
| 葉片結構Structure of Spiry Blade | 雙螺旋線模具冷壓三維葉片Cold double-helix of three-dimensional leaf mold | |||
| 供水Water Supply System | 供水形式Way of Water Supply | 壓縮空氣供水式Offered by air compressor | ||
| 水箱容積Water Tank Volume (L) | 350 | |||
| 外形尺寸External Dimensions L*H*B(m) | 6.5×2.45×2.71m | |||
| 攪拌筒直徑Max Diameter mixing body | 2.35 | |||
