●特點Features
●功率大 ●支架安裝型 ●合RoHS ●護等級IP00 ●適用行業：焊機、電梯、發電機、音響、變頻器等 | ●High power ●Rack mounting te ●RoHS Complied ●Protection grade IP00 ●Applicable industries:welder,elevator,dynamo,stereo system, transduceretc. |
●電氣、機械特性Electrical and mechanical characteristics
特性 Characteristics | 規格值 Standards | 試驗方法 Test methods |
阻值誤差 Resistance tolerance | &plun;1%(F)&plun;2%(G)&plun;5%(J)&plun;10%(K) | 阻值測試儀測量 Testing by the resistance testing instrument |
溫度特性 Temperature coefficient | 300ppm/℃ | 常溫Room temperature+100℃ |
短時間過負荷 Short-time load | ΔR≤1% | U=，5秒seconds
|
緣阻值 Insulation resistance | 1000MΩ，min | 接線柱與支架殼之間的電阻值 The resistance between the terminals and the bracket |
耐電壓 Dielectric withstanding voltage | 無機械損傷及無緣層破損 no evidence of mechanical damage or insulation breakdown ΔR≤0.2% | 接線柱與支架殼之間60秒承受的電壓值The 60 seconds Max. insulation voltage between the terminals and the bracket |
振動 Vibration | 無機械損傷 no evidence of mechanical damage ΔR≤0.2% | XY方向各2小時2hours each 頻率frequency 10~55Hz 振幅amplitude 1.5mm |
可焊性 Solderability | 焊錫面積覆蓋率85%以上 The soldering area is over 85% | 245℃3秒seconds |
●耐候特性Environmental charactaristics
特性 Characteristics | 規格值 Standards | 試驗方法 Test methods |
耐熱性 Heat resistance | 無機械損傷 no evidence of mechanical damage ΔR≤0.5% | 200℃2小時hours |
耐濕性 Humidity | 無機械損傷 no evidence of mechanical damage ΔR≤0.5% | 40℃95%RH 500小時hours |
耐濕負荷壽命 Load life in humidity | 無機械損傷 no evidence of mechanical damage ΔR≤0.5% | 40℃95%RH U=0.1，90分鐘minutes ON, 30分鐘minutes OFF, 500小時hours |
負荷壽命 Load life | ΔR≤3% | U=，90分鐘minutes ON, 30分鐘minutes OFF, 1000小時hours |
不燃性（過負荷） Flame retardant | 不燃燒 no evidence of flaming or arcing | 1~6倍的額定功率 1~6times rated power load |