Electronics (shen zhen ) Co.,Ltd.
1.2品質Quality
本電阻的制造系經(jīng)高品質管理程序,并具有高信賴的品質保證。
The ristor manufactured by highly quality-controlled procs and guaranteed high reliability。
1.3標準試驗狀態(tài)Stand measuring conditions
溫度20&plun;2℃、濕度65&plun;5%。
但在溫度3~35℃、濕度45~85%之情況下,仍可以給予判定。
Temperature 20&plun;2℃,Humidity65&plun;5%。
Being doubt about the judgment, measurements can be made within the following temperature3~35℃、
Humidity45~85%。
1.4型名(例)Te dignation (example)
依使用種類、額定電力、形狀;電阻值容許差、公稱電阻值而區(qū)別,其標示方式如下:
The te dignation shall be in the following form and as specified.
NKNP | 1/2W | T52 | J | 10R | |||
種類 TE | 額定功率 Rated power | 形狀 Form | 電阻值容許差 Ristance Tolerance | 公稱電阻值 minal Ristance value | |||
rmal | all | P | Bulk | K | &plun;10% | E-12 Seri | |
1/2W | 1WS | Txx | Taping XXmm | J | &plun;5% | E-24 Seri | |
1W | 2WS | r | r-Form seri | G | &plun;2% | E-48 Seri | |
2W | 3WS |
|
| F | &plun;1% | E-96 Seri | |
1.5訂購方式HOW TO ORDER PART NUER
KN 1W P J 10R
a b c d e
a | Wire wound ristors | a名稱 |
b | Rated power | b額定功率 |
c | Form | c型式 |
d | Tolerance(&plun;5%) | d容許差值 |
e | Ristance value(10Ω) | e阻值 |
1.6額定電力及尺寸Rated power and dimensions
額定電力系適應在周圍溫度70℃可以連續(xù)負載的電力,如表-1:但周圍溫度如過70℃時之額定電力則依圖一的電力輕減曲線實施。
Rated power is maximum power which can be continuously loaded at specified aient temperature
70℃,however when the aient temperature exceeds 70℃,rated power should be determined form the derating curve of Fig.1.
表—1 Table—1
KNY DIMENSIONS:
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
C. F-Te
( “H1”部份可剪，但長度不得小於6mm)
“H1” part can be cut, but can’t be all than 6mm
