LED Shunt
The NUD4700 is an electronic shunt which provides a current b
in the case of a single LED going into open circuit. LEDs are by nature
quite fragile when subjected to transients and surge conditions. There
are also many cases where high reliability of the LED lighting must be
maintained such as headlights, lighthouses, bridges, aircraft, runways
and so forth. In these cases the low cost addition of the NUD4700 will
provide full urance that an entire string of LEDs will not extinguish
should one LED fail. NUD4700 is also applicable to other loads where
circuit continuity is required. This device is designed to be used with
1 W LEDs (nominally 350 mA @ 3 V).
Features
• A Simple Two Terminal Device
• Automatically Resets Itself if the LED Heals Itself or is Replaced
• ON−State Voltage Tically 1 V
• OFF−State Current less than 250 A
• This is a Pb−Free Device
Tical Applications
• LEDs where Preventive Maintenance is Non Practical
• LED Headlights
• LEDs with High Reliability Requirements
• Crowbar Protection for Open Circuit Conditions
• Overvoltage Protection for Sensitive Circuits