產品描述：

    長度為127mm（測量時可能有一些誤差，請諒解），本測電器適用于直接檢測12~500V（出測試范圍請勿使用）的交直流電和間接檢測交流電的線、相線和斷點檢測，體積輕巧，結構緊湊，方便攜帶使用。

電壓檢測：

   1、后數字為所測電壓值；

   2、未到高段顯示值70%時，顯示低段值；

   3、測量直流電時應手碰負；

   4、測量少于12V電壓物體是否帶電，可用感應電；

   5、帶感應的被測物須接地或接；

感應檢測：

   檢測并排線路時應線間距或用手按住被測物；

斷點檢測：

   沿相線縱向移動，顯示窗內無明顯時為斷點處；

注意事項：

   勿同時接觸兩個電進行測試，否則檢測結果將會不準確或會削弱感應靈敏度。

產品展示：

同系列產品展示：

Directions:

This tester is suitable to measure 12-500V A.C and D.C directly as well as measure the ground line, phase line and the breakpoint of the  A.C indirectly.

Voltage measurement :

1.The final dis are the measured voltage ;

2.If the displayvalue can not reach 70% of the high section it will display the lower section;

3.Touch the negative pole with hand when measure D.C circuit;

4.Use induction pole when measured bodies under 12 voltage if its charged or not;

5.When induction body is under measured, it must connet to ground or zero.

Induction measurement:

When measurement is performed on one of the plet line, it is necessary to widen them, or press the measured line with your hand so as to eliminate interferce.

Breakpoint detection:

Touch the other pole with hand when measured D.C circuit.

Caution:

Do not press two poles at the same time while detecting or it won't display the exact section or the induction will be decreased.

   浙江義烏雙雄五金工具廠是一家生產、銷售：測電筆、電動螺絲刀、電動工具的廠家。自有品牌“童”及“雄熊”。本廠十分注重新品的開發設計，以滿足不同客戶的多層次奢求;雄熊將以真誠的態度、優良的品質、良好的服務來您的信賴和支持，真誠期待與新老客戶攜手共進！

The Xiongxiong hardware tools factory is product and sale the test pencil, the electric screwdriver and the electric tool. We have own brand--"SHENTONG" and "XIONGXIONG". We pays great attention to developing and designing new products to satisfied the different customers the multi-level demands. We will gain your trust and support by genuine attitude, ior quality and good service. We sincerely hope that development with old and new customers.

      每年的4月21-23日  10月21-25，公司都將在義烏小商品博覽會和五金工具展會上設有展位。如果您對我們的產品有任何需要或建議，可以撥打我們的熱線電話，亦可登陸公司網站：www..com，了解更多的產品詳情

      歡迎您的聯系，愿新老客戶與我們共同發展，拓展海外市場！