UI3000測試儀是UI2000電子鎮流器綜合測試儀的增強型，繼承了UI2000儀器的各項技術性能，并增加了單個高頻波的測量。滿足IEC60929、IEC60969、IEC61000-3-2、GB/T15144-2005、GB/T17263-1998電子鎮流器電性能測試要求。

UI3000采用了目前國際上較為的12位速A/D轉換器，采樣速率10MHz。可以真實測試單個高頻波的波形，為技術人員深入研究電子鎮流器的工作機理、進行性分析提供了強有力的工具和手段。

    UI3000 tester is UI2000 electronic ballast radiocomm.tester of enhanced, fully inherited UI2000 instrument of various technical performance, and increases the single high frequency wave measurement. Meet IEC60929, IEC60969, IEC61000-3-2, GB/T15144-2005, GB/T17263-1998 electronic ballast e-test requirements.

    UI3000 adopts the international advanced 12 ultra-high speed A/D converter, highest sampling rate as high as 10MHz. Can a single high frequency wave real-life test waveforms, for the technical staff in-depth study electronic ballast of the working mechani, the reliability ysis provides powerful tools and methods.

性能:

◆測量參數:

◇ 輸入：電壓、電流、功率、功率因數、頻率、相位角、總諧波及0~39次各諧波分量

◇ 輸出：燈電壓、燈電流、燈絲電流、導入陰電流、燈功率、波峰系數、振蕩頻率、高頻波單個波分析

◇ 啟動：啟動過程燈電壓、燈電流、燈絲電流、導入陰電流變化曲線及參數，預熱時間

◇ 預熱能量測試：預熱能量及燈絲預熱啟動時間，電子鎮流器啟動后0~5秒內燈絲電壓、燈絲電流、燈絲功率的變化曲線

◆ 輸入: &plun;(0.1% reading+0.1% range+1 di)

◆ 輸出: &plun;(1% reading+1% range+2 di)

◆ 八窗口顯示輸入特性、輸出特性各參數，便于比較、分析

◆ 輸入電流測試頻響1MHz，能夠準確測量各類電子鎮流器

◆ 分析燈電流包絡波的對稱性

◆ 引入速采樣技術，可動態分析單個高頻波，采樣頻率10MHz

◆ 測試快速，1秒鐘實現輸入、輸出各參數測試

◆ 便攜型，內含單片微機，尤其適用于開發和現場生產，能夠打印各參數及波形、曲線

◆ 可以與PC機通訊，提供軟件，在中文版Windows98/2000/XP/Vista下運行，人機界面好，美觀，操作方便；中英文版面同時提供

Properties:

◆measuring parameters:

◇So the input voltage, current, power, power factor, the grid frequency, phase Angle, total harmonic and 0 ~ 39 times each harmonic component

◇So the output voltage, current, lamp lights, filament current, import cathodic current, lamp power, wave coefficient, oscillation frequency, high frequency wave single wavelet ysis

◇So start: the start-up process lamp voltage, current, the filament lamp current, import cathodic current curve and parameter, preheating time

◇So preheating energy test: preheat energy and filament preheating start time, electronic ballast after the launch of 0 ~ 5 seconds filament voltage, current, the filament filament power change curve

◆input precision: + (0.1% reading + 0.1% HTML + 1 di)

◆output precision: + (1% reading + 1% HTML + 2 di)

◆eight window shows input characteristics, output characteristic parameters, facilitate comparison and ysis

◆Should the input current test frequency response 1MHz, can accurate measurement of electronic ballasts

◆lamp current envelopment ysis of wavelet symmetry

◆Should introduce ultra-high speed sampling technique, can a single high frequency wave dynamic ysis, the highest 10MHz sampling frequency up

◆test rapidly, 1 second realize input and output parameters testing

◆portable te, contains the single chip microcomputer, especially suitable to development and on-site production, able to print various parameters and waveform, curve

◆can with the PC communications, provide specialized software, in Chinese Windows 98/2000 / XP/Vista run, man-machine interface, better appearance, convenient operation, Chinese and English forum also offer