，價優物美，歡迎來樣訂做
讀出方式： 工作原理： 類型： 品牌： 型號： 外型尺寸： mm適用范圍：EC12-24D編碼器
機械特性
Operating temperature 工作溫度 | -40°C~&plun;80°C |
Shaft rotation force 操作力矩 | 30~200gf.cm |
Terminal strength 端子強度 | A statistic load of 300gf shall be applied To the tip of the terminal inany direction for 10sec. |
Shaft wobble(mm p-p) 抽搖晃程度 | Within(0.7XL/30)mm-p-p l=Shaft length |
Soldering heat 焊接溫度 | 260°C，3sec |
Push-pull strength 軸推拉強度 | 3kgf.cn |
電氣特性
Output singnals 輸出信號 | 12（24）pulses/24detent points,360°endless
|
Rating 額定值 | DC 12V，10mA |
Chaatterig 脈行值 | 3.5m S Max.(Time of voltage change From3.5V to 1.5V or from 1.5V to 3.5V) |
Sliding noise(Bounce) 脈行雜音 | 3m S Max.(Time of voltage exceed 1.5v in Code-ON area |
Sliding noise 雜音 | 3.5V Min.(Voltage change in Code-OFF area) |
Phase-Difference△T 波段時差 | 1/4 Min.(Measurement shall be made under The condition which the shaft is rotated on 360°/S) |
Lnsuation strength 緣強度 | For 1 minute or more(At 50V AC) |
Lnsulation resistance 緣電阻 | More than 100M∩(AT 50V DC) |
Contact 接觸電阻 | 1∩ Max |
Rotational life 回轉壽命 | 30，000cycles |
