EMC300A電磁相容.傳導干擾測試系統   EMC300A test system                  

包括1臺EMC300A,1臺EMC200A,2*500W隔離變壓器,1臺1000W隔離變壓器，電腦一臺（自備）。

Including 1 unit of EMC300A, 1 unit of EMC200A,with two 500W isolation transformer, 1 unit of isolation transformer and a computer (self supply).

電子、電器產品的電磁兼容（EMC）問題日益受到重視，尤其是歐美等發達，更是強制執行。以前，由于沒有合適的檢測儀器，不少出口企業為此深感棘手，不但付出了大量的人力、物力，而且影響了產品的開發進程?，F(xiàn)在，再不為此煩惱！電磁兼容·傳導干擾測試系統的成功研制，將使您的工作變得輕輕松松。

More and more attention has been drawn to the Electromagnetic compatibility of electrical and electronic products, especially in the developed countries in Europe and America, it is enforced. It was quite hard for many exportation enterprises before due to lack of proper professional testing instrument; not only they spent lots of human and material resources, but also the development progress of products was influenced. Now, no more trouble in it! The successful development of EMC300A Electromagnetic compatibility & conducted Interference Testing system will make your job easy.

功能及技術指標：

◆測量峰值、準峰值和平均值,范圍：20dBμV-130dBμV(9kHz-150kHz);10dBμV-90dBμV(150kHz-30MHz)

◆頻率掃描范圍：9kHz～150kHz:200Hz，150kHz-30MHz:9kHz

◆頻率掃描步長：100Hz/200Hz/400Hz/(9kHz-150kHz),5kHz/10kHz/20kHz(150kHz-30MHz)

◆掃描間隔：50ms/100ms/200ms(9kHz-150kHz),5ms,10ms,20ms(150kHz-30MHz)

◆接收機基本準確度：&plun;3 dBuV

◆輸入阻50Ω,輸入信號2V,并在5V處保護

◆采用CISPR標準規定的50Ω/50μH+5Ω單相模擬電源網絡

◆滿足FCC,EN55015,EN55022,GB17743等標準的測試要求,為了方便用戶,標準自由設定

◆本系統提供中英文應用軟件,工作時須與PC(電腦)機通訊,數據和曲線由PC機直接顯， Windows98/2000/XP下運行

Specifications：

⑴Measure the PK, QP and Av, with the rang: 9kHz~150kHz:20dBµV~130dBµV;

150kHZ~30MHZ:10dBµV~90dBµV;

   ⑵ Frequency scanning range: 9kHZ~150kHZ (Band width: 200HZ);

150kHZ-30MHZ (Band width: 9kHz);

   ⑶ Frequency scanning step length: 9kHZ-150kHZ: 100HZ/200HZ/400HZ;

 150kHZ-30MHZ: 5kHZ/10kHZ/20kHZ;

   ⑷ Scanning interval: 50ms/100ms/200ms (9kHZ-150kHZ),

5ms/10ms/20ms(150kHZ-30MHZ).

   ⑸ basic accuracy of receiver:&plun;3dBuV;

   ⑹ Input resistance 50Ω, Max. input signal 2V, and it is protected at 5V;

   ⑺ it uses 50Ω/50µH+5Ω single phase V-te simulative power supply network according to CISPR standard;

   ⑻ meet the test requirements of the standards such as FCC, EN55022, GB17743 etc, and the standard can be set freely, for the convenience of customer;

   ⑼ this system provides Chinese and English application software, it must communicate with a PC (computer) when operating, all the data and curves will be displayed directly by the computer, it operates under Windows98/2000/XP,.