自動(dòng)化光柵
Light grid
LGS100 Serie
Technical Data: LGS100 Serie
| 產(chǎn)品闡述 | ||
| Automation light grid | ||
| General specifications | ||
| Effective detection range | Standard : 0.3 ... 6 m Option /35: 0.5 ... 8 m | |
| Threshold detection range | Standard : 7.5 m Option /35: 10 m | |
| Light source | IRED | |
| Light te | modulated infrared light , 850 nm | |
| Field height | see Table 1, max. 3000 mm | |
| Beam spacing | 100 mm | |
| Number of beams | see Table 1, max. 31 | |
| Angle of divergence | 10 ° | |
| Functional safety related parameters | ||
| MTTFd | 78 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 60 % | |
| Indicators/operating means | ||
| Function display | Emitter: Yellow LED, illuminates at high emitting power, off at low emitting power Receiver: Yellow LED: illuminates when an object is detected flashes when falling short of the stability control (4 Hz) Error message: Yellow LED flashes (8 Hz) in emitter and receiver | |
| Controls | Receiver: 2 pushbuttons for programming | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC | |
| Interface | ||
| Interface te | IO-Link | |
| Protocol | IO link V1.0 | |
| Output | ||
| Switching te | Factory setting: dark ON , Switchable to light ON mode | |
| Signal output | Switch output (detection field C/Q) 1 push-pull output, short-circuit protected, reverse polarity protected on pin 4 (receiver), Height monitoring (H1, H2. H3) 3 Push-pull outputs, short-circuit proof, reverse polarity protected on pin 5, pin 6, pin 7 (receiver) | |
| Compliance with standards and directives | ||
| Directive conformity | EMC Directive 2004/108/EC | |
| Standard conformity | ||
| Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 | |
| Mechanical specifications | ||
| Protection degree | IP67 | |
| Connection | Emitter: 200 mm connecting cable with 4-pin, M12x1 connector Receiver: 200 mm connecting cable with 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm2 Max. cable length 30 m |
