UT75A-000-10-00

UT75A數字指示調節儀選型表：

性能、可用性和靈活性得到提高，滿足先進控制需求，適合多種應用。

• 豐富的配方管理，有效提高生產性

• 支持CC-Link、Profibus和DeviceNet通信協議，能夠輕松連接管理配方的PLC

• 程序模式由多達20個程序段組成

• 兩條回路運行程序模式

• 豐富的配方管理有效提高生產性

• 在20個配方中輕松切換

• 程序模式運行

• 通過PLC輕松實現配方切換

• 減少工程成本以及外圍設備

• 支持CC-Link、Profibus和DeviceNet通信協議(可選)

• 通過梯形圖程序同樣可以完成復雜的I/O偏移計算和報警順序控制

• 通過定制的梯形圖指令，能夠?qū)?shù)字運算等多行梯形圖程序簡化為單行

• 簡化梯形圖程序

• 能夠減少外部運算器和順序控制回路(繼電器、計時器等)

• 無需任何程序，通過PLC即可實現通信

• 保護用戶的知識與技術

• 通過定制的梯形圖指令，能夠?qū)?shù)字運算等多行梯形圖程序簡化為單行

• 通過密碼實現定制梯形圖程序的安全管理

• 使用梯形圖程序可以創建定制的算術表達式

• UT750的繼承與發揚

• 能夠進行平方根、指數、對數運算

• 能夠進行溫度/濕度和CP計算

• 15種基本指令和111種應用指令

• 梯形圖程序可多達1,000步

• 兩條回路可以同時或者單獨運行

• 可實現程序模式運行和常數運行的雙回路控制

• 一臺調節器，兩條回路

• 多種算術指令，大量的梯形圖程序

• 支持先進的算術指令

• 減少停機時間

• 簡單的拷貝，即可在另一臺調節器上設定參數

• 在表盤上安裝調節器之前即可設定參數

• 調節器不通電源也同樣可以設定參數

• 一臺備份調節器可用于不同控制對象的多種傳感器和加熱器/執行器

• 通用輸入和輸出

• 通過LL50A輕松實現參數設定和轉換

Advanced Digital Indicating Controller UT75A

The Enhanced Peformance, Usability, and Flexibility Meet the Advanced Control Needs in a Wide Variety of Applications

Switching between 20 Recipes

• Increasing yield by managing a variety of recipes

• Increasing quality in combination with 16 PID values

Program pattern operation

• Program pattern consists of up to 20 segments

• 2-loop program pattern can be operated

Easy to switch between recipes with a PLC

• Since CC-Link, Profibus, and DeviceNet are supported, it is easy to link to a PLC that manages recipes

Simplifying ladder programs

• Multi-line ladder programs such as numerical calculation can be turned into a single line using a custom ladder instruction.
  - This simplifies the ladder programs and facilitates easy engineering and maintenance.
  - Created custom ladder instructions can be saved in a file.
  - Custom ladder instructions saved in a file can be used by another UT75A controller.

External calculators and sequence control circuits (relay, timer, etc.) can be reduced

• Complex I/O offset calculation and alarm sequence control can be accomplished using a ladder program
  - Engineering costs such as wiring and initial setup can be reduced significantly.
  - A sequence over 2 loops can be created for 2-loop control
  

Communication with a PLC is possible without using any program

• CC-Link, Profibus, and DeviceNet are supported (optional)
  - Since communication with the PLC without using any program is possible, engineering costs can reduced.

Custom arithmetic expressions can be created using a ladder program

• Multi-line ladder programs such as numerical calculation can be simplified into a single line using a custom ladder program

• Custom ladder programs are securely managed using passwords
  - Custom arithmetic expressions can be made inaccessible to protect the knowledge of users

2-loop control with a single controller

• 2-loop synchronous and independent operation is available
  - The start and stop instructions can be run synchronously or independently.

• Program pattern operation and constant value operation are available for 2-loop control
  - A sequence can be run by combining the program pattern operation and fixed-point operation.

A variety of arithmetic instructions and large capacity ladder programs

• 15 basic instructions and 111 application instructions

• Ladder program capacity up to 1,000 steps

Advanced arithmetic instructions are available

• Square root, exponential, and logarithmic calculations are available

• Temperature/humidity and CP calculations are available

Universal input and output

• A single backup controller can be used for different control objects with different types of sensors and heaters/actuators
  - The UT75A can flexibly respond to a failure and sudden specification changes.

Simple parameter setting and transition using an LL50A

• Parameters can be set on other controllers just by copying them

• Parameters can be set before mounting the controller to the panel

• Parameters can be set without power supply for the controller