泰州工程布防水布拉斷力測試機泰州撕裂強度試驗機，為市場上較為通用的力學測試儀器系列，此款試驗機可同時對防水布，橡膠布，牛仔布，纖維布等布匹產品進行拉伸，撕裂，剝離等性能分析測試，并得出精準測試數據，供參考比對。

以下提供部分技術參數供參考，如果您看到的參數不符合您產品的測試要求請聯系我們，將為您推薦合適的機型。廠商同時提供測試服務，歡迎來廠測試交流。

This machine is mainly used to detect metal, non metal materials tensile, compression, peeling, the tear, bending, three point bending, shear and other physical properties. At the same time for testing and data processing based on GB, ISO, JIS, ASTM, DIN and provide users with a variety of standard.This machine is widely used in material inspection hardware tools, fasteners, auto parts, aerospace, wire and cable, rubber, plastic, paper packaging industry analysis. Is the ideal test equipment for scientific research institutes, tertiary institutions, industrial enterprises, and technical supervision, arbitration and other departments.
技術規格：
一、 主要技術參數：
1、 試驗力： 10kN（可選配20kN）；
2、 準確度等級：優于1級；
3、 負荷測量范圍：0.2%—100%FS；
4、 試驗力示值允許誤差極限：示值的±1%以內；
5、 試驗力示值分辨率：試驗力的1/±200000；
6、 采樣頻率：400次/秒；
7、 變形測量范圍：0.2%—100%FS；
8、 變形示值誤差極限：示值的±0.50%以內；
9、 變形分辨力：變形的1/8000
10、 位移示值誤差極限：示值的±0.5%以內；
11、 位移分辨力：0.001mm
12、 位移速度調節范圍：50-500mm/min
13、 位移速率控制：設定值的±1.0%以內；
14、 有效試驗寬度： 400mm(前后不受限)
15、 有效拉伸空間距離：1000mm(不安裝測試夾具時)
16、 主機外型尺寸（長×寬×高）：780×465×1650（mm）
17、 使用電源：?jiǎn)蜗?20V 50Hz 1kW；
18、 機臺重量：約160kg；

Control and data processing software features:1, advanced IC technology, data acquisition and amplification system of professional design, has the advantages of high degree of integration, stable and reliable, convenient use etc.. The control software can automatically calculate the tensile strength, bending strength, bonding strength, peel strength, elastic modulus, elongation of detection data, open the formula editing can automatically calculate either during the test finger point force, stress, displacement, deformation and other data. Requirements with the corresponding metal materials and non-metal materials of national standard of test process control and data processing.2, control mode: constant velocity, location shift, select the load control mode;3, automatic reset: after the start of the test, the measurement system of automatic zero adjustment;4, automatic transmission: according to the size of load automatically switch to the appropriate range, in order to ensure the accuracy of measurement data;5, automatic archiving: test data and test conditions of automatic storage, to prevent data loss caused by forgetting to save;6, the batch experiment: the samples on the same parameters, one set after distal batch test;7, display mode: data and curve with the test process of dynamic display;8, curve traversal: after completion of the test, can be carried out analysis of the curve, to find out the corresponding data test curve with the mouse;9, the curve can be displayed and printed: selection of stress - strain, displacement, force - time, displacement - time curve;10, unit: unit: switching power ( g, kg, N, LB ), stress ( unit: kg/mm2, N/mm2, Mpa, lbf/in2 ): ( m, mm displacement unit, in )11, test report: programmable and print the test report according to the user request format, and can export to WORD or EXCEL file;12, security: more than the maximum load of 2 ~ 10%, automatic safety protection;13, mechanical performance index calculation sample automatic detection, analysis, or artificial intervention, to amend the results automatically according to the analysis of the requirements of the relevant standards, in order to improve the accuracy of data;