企業檔案

深圳市聲儀科技有限公司

免企業未認證證營業執照未上傳

經營模式：工廠

主營產品：電聲分析儀;soundcheck電聲測試;8121C喇叭壽命試驗機;7116C 掃頻儀;7117C F0測試儀;1600 電聲儀;喇叭異常音測試;臺灣陽光電聲儀;ESD靜電放電發生器;喇叭受話器電聲測試;掃頻儀|聽音機;Type2100 電聲測試儀;耳機電聲測試儀;soundcheck電聲系統;藍牙耳機測試儀;電聲測試儀;1700電話機分析儀;2100S喇叭測試儀;耳機麥克風測試儀;臺灣陽光代理

進入商鋪

產品搜索

IMPULSE ISE SIMULATOR
INS-4020/4040

For additional product information, please download the INS seri brochure.INS-2005.PDF (1516KB)

Options
Injection unit

FEATUR

Impulse ise Simulator INS-4020/4040 are more convenient and user-friendly than former models, thanks to the following featur.

Push button setting for all parameters
Terminal block outlet panel
Sweep operation for output voltage, phase angle and repetition cycle
Up to 5 tt settings stored in the momory
Floating output
Coupling mode selection by plugging the supplied coaxial connector to the selected port
Easily changeable mercury relay
Built-in 50 ohm terminator
Easily changeable outlet panels
CE marked

SPECIFICATIONS

Item	Model
INS-4020 (2kV)	INS-4040(4kV)
Output voltage	0.01 ~ 2.00KV &plun;10% with 50 ohm load, 10V step, Sweep mode available	0.01 ~ 4.00KV &plun;10% with 50 ohm load, 10V step, Sweep mode available
Polarity	Positive or negative
Square wave	Pulse width	50ns, 100 ns, 200ns, 250ns, 400ns, and any combination thereof, maximum width, 1µs or 10ns&plun;3ns (the shortt connection)
Pulse rise time	< 1ns
Output impedance	50 ohmsystem (53.5 ohm)
Pulse repetition mode	Variable	10ms~ 999ms&plun;10%, 1ms step Sweep operation available	16ms ~ 999ms&plun;10%, 1ms step Sweep operation available
Line phase	50 or 60Hz, Injection phase angle 0~359°, 1° step Sweep operation available
External	<EXT mode> >10ms, Pulse width>1ms TTL/Open collector negative logic	<EXT mode> >16ms, Pulse width>1ms TTL/Open collector negative logic
Also functions for timing reference signals input from an external injection unit
1 shot	Single pulse injection to the angle which is specified by Line phase setting on the power line, or Single shot without injection power line.
Memory	Up to 5 tt settings
Power capacity of equipment under tt	AC 240V, DC60V, Single phase, DC60V 16A
Power supply	AC100~ 240V 50/60H
Power consumption	140VA
Operating temperature and humidity	15~35°C / 25~75% ( dewing shall occur.)
Dimensions	(W) 430 X (H) 249 X (D) 420 mm(Projections excluded)
Weight	Approx. 19kgs

Included accsori

Coaxial cable Model: 02-00013A (8 pcs)
- 30 cm length
SG short plug Model: 02-00106A (1pc)
Outlet panel Model: 18-00061B (1 pc)
- Terminal block te
- AC240V/16A DC60V/16A maximum
- Leav the factory with this panel attached to the main unit (INS-4020 or INS-4040)
AC cable (1pc)
- AC100-115V 3-p, 2.4m
Instruction manual (English / 1 pc)

Option: Injection unit Model: IJ-4050 Other options

The built-in injection circuitry has 16A rating for single-phase AC. For tt exceeding this current limit or 3-phase application, IJ-4050 shall be used.

This optional unit can extend the EUT supply voltage and current ratings up to 3-phase AC 415V/50A. In conjunction with INS-4020/4040, this unit can operate in the EUT Line Synchronization mode.

SPECIFICATIONS

	Item	Model IJ-4050
Impulse input	8kV max when the INS-4020/4040 output is t terminated.
EUT power capacity	3-phase, 5-wire (L1, L2, L3, N, PE) A15V, 50A
Coupling mode selection	By short plug connection
Zero cross detection	Detects L1-L2 voltage and outputs synchronization signal from the SYNC OUT connector
Dimensions and weight	(W)430 x (H) 200 x (D) 535 mm (Projections excluded) Approx. 25.0 kgs