測量范圍：不透光度 N ： 0-99.9% （相當煙度值 S F ： 0-10FSN ）
光吸收系數 K ： 0 -11.37m -1
分辨率 0.1%
測量電路響應時間 1s ± 0.1s
準確度≤± 2%
測量室尺寸 : 有效長度 405 ± 0.3mm ，內徑ф 20mm
加熱時間 : 220V 大約 20 分鐘
輸出方式 : 微機控制的 LED 顯示（ 4 位），可附打印機打印出煙濃度（暗度）值，測試時間、日期等。也可附接口與計算機聯網。
溫度報警 : 測量室溫度 70 ℃ 左右，當溫度超過 100 ℃ 或低于 60 ℃ 時，則溫度報警：故障燈亮，故障顯示 09 （溫度低于 60 ℃ ）或 08 （溫度高于 100 ℃ ）。
取樣探頭：探頭內徑 ф 14 . 2 mm 。本公司可按客戶對探頭內徑等特殊要求進行定制。
總設備功率≤ 150VA
測量室加熱功率≤ 120VA Measuring range: not transmittance of N: 0-99.9% (equivalent to smoke value SF: 0-10FSN)
Light absorption coefficient K: 0-11.37m-1
Resolution of 0.1%
Measuring circuit response time 1 s ± 0.1s
≤ accuracy of ± 2%
Measurement Room size: effective length of 405 ± 0.3mm diameter ф 20mm
Heating Time: 220V about 20 minutes
Output: microcomputer-controlled LED Display (4), can be attached printers print out smoke concentration (dark degrees) maximum, testing time, date, etc.. Also attached interface with computer networking.
Temperature warning: Measuring about room temperature 70 ° C, when the temperature over 100 ° C or below 60 ° C, the temperature alarm: fault lights, failure showed that 09 (temperature below 60 ° C) or 08 (the temperature is higher than 100 ° C).
The sampling probe: probe diameter ф 14.2 mm. The Company will be able to probe diameter customer requirements, and other special customization.
Total equipment power ≤ 150VA