上海卓峙自動化設備有限公司是一家從事工業自動化工程設計、安裝、調試、售后服務和代理銷售各類電氣，服務于一體的企業。公司堅持“信譽為本，誠信經營”的理念，依靠網絡從事世界傳感器，柵、隔離柵，電源，低壓電器以及氣動液壓,儀器儀表,機電產品銷售與工程配套服務，公司為冶金、石油、化工、鋼鐵、電力、電子、船舶、汽車、、紡織、食品、、制藥、包裝、等眾多行業提供完善的技術方案和備件服務。
銷售：德國福(P+F)，英國MTL柵，德國圖爾克(TURCK)，德國施克(SICK)，德國菲尼克斯(PHOENIX)，邦納(BANNER)，日本CKD，德國易福門(IFM)等，全系列柵，電源，模塊，傳感器，編碼器，端子繼電器等，公司備有大量庫存，另為客戶提供偏門冷門的歐州產品。
聯系人：徐工
電話：
| 產品闡述 | ||
| 24 V DC | ||
| General specifications | ||
| Signal te | Dial Input | |
| Supply | ||
| Conneion | terminals 23+, 24- or power feed module/Power Rail | |
| Rated voltage | 20 ... 30 V DC | |
| Rated current | approx. 100 mA | |
| Power loss/power consumption | ≤ 2 W / 2.2 W | |
| Input | ||
| Conneion | Input I: intrinsically safe: terminals 1+, 3- Input II: non-intrinsically safe: terminals 13+, 14- | |
| Input I | sensor acc. to EN 60947-5-6 (NAMUR) or mechanical conta | |
| Pulse duration | > 50 μs | |
| Input frequency | 0.001 ... 5000 Hz | |
| Lead monitoring | breakage I ≤ 0.15 mA; short-circuit I > 6.5 mA | |
| Input II | startup override: 1 ... 1000 s, adjustable in steps of 1 s | |
| Aive/Pive | I > 4 mA (for min. 100 ms) / I < 1.5 mA | |
| Open circuit voltage/short-circuit current | 18 V / 5 mA | |
| Output | ||
| Conneion | output I: terminals 10, 11, 12 output II: terminals 16, 17, 18 outout III: terminasl 19+, 20- output IV: terminals 8+, 7- | |
| Output I, II | signal, relay | |
| Conta loading | 250 V AC / 2 A / cos φ ≥ 0.7 ; 40 V DC / 2 A | |
| Mechanical life | 5 x 107 switching cycles | |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms | |
| Output III | eleronic output, pive | |
| Conta loading | 40 V DC | |
| Signal level | 1-signal: (L+) - 2.5 V (50 mA, short-circuit/overload proof) 0-signal: switched off (off-state current ≤ 10 μA) | |
| Output IV | og | |
| Current range | 0 ... 20 mA or 4 ... 20 mA | |
| Open loop voltage | max. 24 V DC | |
| Load | max. 650 Ω | |
| Fault signal | downscale I ≤ 3.6 mA , upscale ≥ 21.5 mA (acc. NAMUR NE43) | |
| Colleive error message | Power Rail | |
| Transfer charaeristics | ||
| Output IV | ||
| Resolution | < 10 μA | |
| Accuracy | < 20 μA | |
| Influence of ambient temperature | 0.005 %/K (50 ppm) | |
| Direive conformity | ||
| Eleromagnetic compatibility | ||
| Direive 2004/108/EC | EN 61326-1:2006 | |
| Low voltage | ||
| Direive 2006/95/EC | EN 61010-1:2010 | |
| Conformity | ||
| Eleromagnetic compatibility | NE 21:2006 | |
| Proteion degree | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Proteion degree | IP20 | |
| M | 300 g | |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 in) , housing te C3 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in conneion with Ex-areas | ||
| EC-Te Examination Certificate | TüV 99 ATEX 1471 , for additional certificates see www.pepperl-fuchs.com | |
| Group, category, te of proteion | II (1)GD, I (M1) [Ex ia] IIC, [Ex iaD], [Ex ia] I (-20 °C ≤ Tamb ≤ 60 °C) | |
| Statement of conformity | TüV 02 ATEX 1885 X | |
| Group, category, te of proteion, temperature cl | II 3G Ex nA nC IIC T4 | |
| Output I, II | ||
| Conta loading | 50 V AC/2 A/cos φ > 0.7; 40 V DC/1 A resistive load | |
| Direive conformity | ||
| Direive 94/9/EC | EN 60079-0:2009, EN 60079-11:2007 , EN 60079-15:2005 , EN 60079-26:2007 , EN 61241-11:2006 | |
| International approvals | ||
| FM approval | ||
| Control drawing | 16-538FM-12 | |
