APPLICATION（應(yīng)用）
l Vertical Laboratory Vacuum Hot Prs furnace for thermal procsing of rearch materials
l Temperature - rated for up to 1500°C maximum while prsing; ramp rate, 10°C/minute nominal
l Hot prs - single 5 ton automatic ram in with fixed pedtal on bottom
l Ram travel - 4” stroke length
l Work area - 4” diameter x 6” high, graphite hot zone
l Vacuum - ultimate vacuum <25μ; leak rate <10μ/hour CEDORT (Clean, Empty, Dry, Outged at Room Temperature)
l Controls - automatic ramp / soak temperature control; manual control of vacuum pumps and ram prsure
l Options available for higher temperatur, improved vacuum levels, metal hot zon for clean procsing and enhanced controls
CHAER（腔體）
l Vertical jacketed chaer - 16” diameter x 16” high, nominal dimensions
l All SA-516-70 mild steel construction, chaer, jacket, cover and flang
l -loading chaer - cover raised with manual hydraulic jack, swings aside for full accs to load, with buna o-ring, manual clamps, for operation from vacuum to 3 psig
HOT ZONE（熱區(qū)）
l Vertical graphite hot zone - graphite element cage, rigid graphite board insulation
l Dimensions - sized for 4” diameter by 6” high die set
l Temperature - rated for continuous operation at 1500°C while prsing
l Heated all around perimeter; not heated on ends
l System can operate in vacuum or inert gas
HOT PRS（壓力）
l Hydraulic prs - automatic 5 ton cylinder, 4” stroke, mounted above chaer
l Load train - 3” diameter graphite ram, 3” diameter water-cooled ram extension
l Graphite pedtal for bottom support of die, rated for 5 tons
l Prs control - manual pump with dial prsure gauge
