針對市場上很多假冒德國優圖UV-DESIGN公司生產的UV能量計，UV-DESIGN生產的所有產品都有以下Logo, 謹防上當假冒產品采用國產傳感器，測量數據不穩定，測量出來的數據相差幅度大，而且假冒能量計,每兩­叁個月就要校準。嚴重影響德國優圖UV-DESIGN公司的聲譽.真假識別方法請查詢以下網址  UV-1250 Colour SD Radiometer + Dosimeter
+ choice of a combination of two different spectral ranges:
+ UV-A intensity mW/cm2 + UV-V dose mJ/cm2
+ UV-B intensity mW/cm2 + UV-V dose mJ/cm2
+ UV-C intensity mW/cm2 + UV-A dose mJ/cm2
+ UV-V intensity mW/cm2 + UV-V dose mJ/cm2
+ big colour graphic display
+ numerical and graphical display
+ permanent or „triggered“ measuring mode*
+ SD Memory Card
+ graphic chart on computer
+ re-chargeable accu cells with charger
The UV-1250 Colour SD Radiometer + Dosimeter is a self-contained, high quality UV measuring instrument. It is
designed to measure and record UV intensity and UV dosage in the UV curing process. Measuring results are indicated
both, graphically and numerically on a big colour display.
It is equipped with two different UV sensors for the individual measuring of a combination of either
UV-A 315 – 410 nm
UV-B 280 – 315 nm
UV-C 230 – 280 nm
UV-V 395 – 445 nm
UV 230 – 410 nm
With these two different UV-bands many of the measuring requirements of UV curing applications can be covered.
Due to its two different UV sensors and the integrated microprocessor the UV-1250 Colour SD Radiometer + Dosimeter
can measure, record and display the peak of the UV-intensity (mW/cm2) for each UV-band individually plus the peak of
total UV energy.
Additionally, this instrument is calculating the UV-dosage (mJ/cm2) of the UV energy supplied during the time of exposure
of one measuring cycle. The UV-dosage is calculated for each UV-band (UV-A, UV-B and UV-C or UV-V) individually and
as total Integral of UV-dosage over all three UV-bands. This allows to determine not only the total energy, but also how
that energy is delivered, i.e., what intensity and dose at what UV-band.
Optionally it is available with an extra sensor for measuring temperatures from 0 to 230° F / 0 to 110° C.
*This instrument features a selectable „triggered mode“, i.e. the 30 sec recording cycle starts within a 120 second
readiness phase not before the incident UV-intensity exceeds 2 mW/cm².
The two sensors are on the back of the unit which also serves as a heat shield. After completion of the measuring cycle
the measuring results are instantly displayed numerically and graphically auto-scaled on the built in 45 x 34 mm (1.75” x
1.3”) TFT colour display.
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension
of the battery service life.
This Radiometer + Dosimeter is equipped with an SD-Memory Card Slot and an evaluation software for downloading the
data to a computer to show, edit and store a history of the measuring results of the entire measuring cycle as graphic
charts (mW/cm2) and (mJ/cm2)
The following versions are available:
63.5.1. UV-1251 Colour SD Radiometer + Dosimeter UV-A + UV-V
63.5.2. UV-1252 Colour SD Radiometer + Dosimeter UV-A + UV-B
63.5.3. UV-1253 Colour SD Radiometer + Dosimeter UV + UV-A
63.5.4. UV-1254 Colour SD Radiometer + Dosimeter UV + UV-B
63.5.5. UV-1255 Colour SD Radiometer + Dosimeter UV + UV-V
63.5.6. UV-1256 Colour SD Radiometer + Dosimeter UV-B + UV-V
63.5.7. UV-1257 Colour SD Radiometer + Dosimeter UV-C + UV-VUV-1250 Colour SD Radiometer + Dosimeter
Technical Data:
Spectral ranges: UV-A 315 – 410 nm
UV-V 395 – 445 nm
UV-B 280 – 315 nm
UV-C 230 – 280 nm以上是德國uv能量計UV-3C-T的詳細信息，如果您對德國uv能量計UV-3C-T的價格、廠家、型號、圖片有什么疑問，請聯系我們獲取德國uv能量計UV-3C-T的新信息。