YL-8805S高低溫保持力試驗機 / 恒溫恒濕型持粘性試驗機

RETENTIVITY TESTER

產品簡介：本機為分體式結構，是專用于在高溫、低溫或濕度的環境下測試保持力的裝置。可同時測多組。
Introduction:This tester is split structure , specially used for test retentivity in high temperature, low temperature, or humidity environment. It is available to multi-groups test simultaneously.  

依據標準:依照有關于保持力的標準規范進行測試。
Design Standards：To conduct tests in accordance with the standard specifications of retentivity 
PSTC-107 procedure G、 PSTC-53 、TLMI -7、 ASTM D3654 procedure A

規格與特點：Specification：
1、分體可拆式設計，計時器組可拆下另外放。
    The fission is detachable design, the timer groups can be detached and placed independently. 
2、兩組間以2.5M長的耐熱電纜線連接。
    There is an long as 2.5M heating resistant cable wire between every two groups to connect. 
3、定時器是1公分寬的顯示屏，顯示到0.1分鐘
    Timer is a displaying screen as wide as 1cm, which can display 0.1 minutes. 
4、遵照 PSTC規定使用2" × 3" (5cm × 7.5 cm) 標準鋼片
    According to PSTC , use 2" × 3" (5cm × 7.5 cm)  standard steel sheet. 
5、 保持力鋼片厚可放到6mm厚。
    Retention steel sheet can be as thick as 6mm at most. 
6、整個可耐熱到 400°F (0°C～204°C)長久使用。
    The whole machine can bear 400°F (0°C～204°C) , which can be used for a long time. 
7、 吊掛角度可以從180° 或選擇角度可調 
   The hang angle can be adjustable from 180° or selective angle. 
8、 可以放進專用烘箱，高低溫試驗箱，恒溫恒濕試驗箱中使用。
     Available to be put into use in dedicated oven, high and low test chamber, constant temperature and humidity test    chamber 
9、 不必插電，電池可用十年 
   It is not necessary to connect to the power , the battery can be used for 10 years.