| 品牌 | anseros | 型號 | mp |
| 類型 | 泵吸式臭氧檢測儀 | 測量范圍 | 0-2000mg/m3 |
| 測量對象 | ozone | 測量 | 0.2% |
| 電源 | 220vac |
臭氧檢測儀MP，臭氧分析儀，臭氧水檢測儀，高濃度臭氧檢測儀，低濃度臭氧檢測儀，高臭氧分析儀，進口臭氧檢測儀，世界臭氧檢測儀ANSEROS COMPANY
Anseros UV ozone analyzer for measurement of ozone in air or oxygen at low concentrations
Continuous processUV ozone analyzer for measurement of ozone in air or oxygen at low concentrations.
德國進口低濃度臭氧檢測儀
德國進口高臭氧氣體檢測儀
德國進口臭氧分析儀維修中心
CONTINUOUS PROCESS UV OZONE ANALYSER FOR MEASUREMENT
OF OZONE IN AIR AT HIGH AND LOW CONCENTRATION
低濃度臭氧分析儀 技術參數：
檢測范圍：(MP6060 )0~2.000 0~20.00 0~200.0 mg O3/Nm3
(MP6020 ) 0~2000 mg O3/Nm3
檢測：0.2
重 現 性：±0.2%
輸 出：0-20mA，串行接口
零點偏移：0%(自動校零)
量程偏移：0%(微處理器控制)
電 源：220VAC 50Hz
可選顯示單位：ppm, mgO3/m3, mgO3/Nm3, ppm (V/V) , pphm, pphm (V/V)
壓力補償：自動
溫度補償：自動
氣體壓力：連續
外形尺寸：H135×W485×D365
重 量：10Kg
保 質 期：12個月
ANSEROS MP OZONE ANALYZER 0-100PPM,0-2G/M3
● BUILT-IN ALARMS ● MICROPROCESSOR CONTROLLED ● MINIMUM DETECTABLE LEVELS UNDER 1ppb ● UNIQUE TECHNOLOGY: NO SWITCHING VALVES AND ONLY A SINGLE UV BEAM IS USED ● NO CALIBRATION NECESSARY (PRESET AT MANUFACTURE) ● CUSTOM ENGINEERED ABSORPTION CELL FOU REQUIRED APPLICATION ● ERROR FREE DATA ENSURED BY A CONTINUOUS FLOW OF THE SAMPLE THROUGH THE ANALYSER ● DIGITAL OUTPUT SIGNALS: OZONE LEVEL, GAS PRESSURE, GAS TEMPERATURE ● INTERNAL OZONE GENERATOR (OPTIONAL) ● CONFIRMS THE FOLLOWING STANDARDS: EPA, ISO, IOA, DIN,NFT |
ACCURATE MONITORING OF LOW AND HIGH OZONE CONCENTRATIONS IN GAS |
MEDICAL, ODOUR REMOVAL, ENVIRONMENTAL, INDUSTRIAL SAFETY/HYGIENE, R&D/MATERIAL TESTING, CALIBRATION OF OTHER OZONE MONITORS |
| PRINCIPLE OF OPERATION |
| SPECIFICATIONS |
| NON-DISPERSIVE ULTRA-VIOLET ABSORPTION (LAMBERT-BEER); ADMITTED OPTICAL SYSTEM | EXAMPLES OF POSSIBLE UNITS DISPLAYED: ppm,mgO3/Nm3,gO3/Nm3,%WEIGHT |
| RANGE：0～1.000, 0～10.00, 0～100.0ppm 0～1.000, 0～10.00, 0～100.0, 0～200.0 gO3/Nm3 (OTHERS ON REQUEST) | PRESSURE COMPENSATION：AUTOMATIC |
| TEMPERATURE COMPENSATION AUTOMATIC | |
| REPEATABILITY: ± 0.2% OF SCALE END | RATE OF MEASUREMENT: EVERY 2 SECONDS |
| ACCURACY: ±2% OF READING | DIGITAL OUTPUTS: RS232、IEEE、V24（OZONE LEVEL, PRESSURE, TEMP） |
| DETECTION LIMIT: 10ppb | ANALOGUE OUTPUTS: CUSTOMIZED SPECIFICATION |
| ZERO DRIFT: 0%(AUTOMATIC ZERO) | REQUIRED FLOW RATE: 100～200l/h |
| SPAN DRIFT: 0%(MICROPROCESSOR CONTROLLED) | WEIGHT： 10kg |
| SIZE::STANDARD 19INCH CABINET MOUNT, 3HU (mm) H135×W485×D365 (inch) H5.3” ×W18.9”×D14.2” | GAS PRESSURE: CONTINUOUS |
| EXTERNAL POWER SUPPLY:110V/230V, 50～60Hz | POWER SUPPLY: INTERNAL/EXTERNAL110V/230V50～60Hz |
| OUTPUT: 0/4～20mA或0～1VDCRS32 SERIAL INTERFACE (OPTIONAL) |
ANSEROS GM-PRO 0--200G/M3 0.2%
ANSEROS WP 0--200PPM, 0---200G/M3
ANSEROS GM-6000-OEM 0-300G/M3 1%
ANSEROS SEN6060 0-1PPM
ANSEROS SEN-K,SEN-P 0-1PPM
