| 特點:FEATU | 適用溫度測量及顯示 Apply in temperature measure and display | 多項模擬運算,檢測高 A number of ogue computation,high measuring | accuracy. | 有冷端補償裝置,配K型熱電偶或PT100熱電阻 | With cold compensation,with K or Pt100 |
|
|
|
一、型號及含義 ORDERING CODE | | | | 輸入方式 Input mode K:K型熱電偶 P:Pt100熱電阻 | 測量范圍 200:-199~+200度 499:-199~+499度 800:0~800度 1200:0~1200度 | 3位半數顯表 檢測溫度 3 1/2 Di display meter Measured temperature only | 選型示例:用熱電阻PT100測量溫度0~400度,故選型為Dp3-T499P |
|
|
|
二、技術參數 SPECIFICATION | 技術參數 Specification \型號Model | Dp3-T200P | Dp3-T499P | Dp3-T800K | Dp3-T1200K | 測量范圍 Measuring range | -199~+199.9度 | -199~+499度 | 0~800度 | 0~1200度 | 輸入方式 Input mode | pt100 | pt100 | K | K | 測量 Measuring accuracy | &plun;0.5%FS&plun;2Di | &plun;2%FS&plun;2Di | A/D轉換 A/D converter | 二積重分 Dual slope | 采樣速度 Sampling speed | 2.5次/秒 2.5/sec | 顯示 Display | 紅色數碼管 14.2mmH LED red 14.2mmH | 電 源 Aux.Power supply | AC 110V/220V 50/60Hz | 外形尺寸 Outside dimension | 48H*96W*100D | 工作環境 Operating temperature and humidity | 0~50度 45-85%RH | 耐壓強度 Insulation strength | AC 1500V 1min 電源端子與外接端子之間 | 緣阻 Insulation impedance | ≥DC500V 100M 歐 電源端子與外接端子之間 |
|
|
|
|
|
|
四、注意事項 CAUTIONS | 1、工作環境溫度0~50度,相對溫度85%以下 Operate in ambient temperatur of 0 to 50,humidifi of ls than 85%R.H. | 2、強烈震動和沖擊。 Avoid operating in an area surrounded by vibrations or shock. | 3、大量灰塵以及有害化學藥品侵入 . Avoid operating in an area surrounded by dust or corrosive materials. | 4、使用時應遠離干擾源. Operation and installation should be far away from the generating devic. | 5、輸入導線不宜過長,使用屏蔽線較好。 Input wire should not be too long,use the shielded wire. | |
|
|