英國MICHELL密析爾Easidew EA2-TX 蘇州德魯夫代理

Easidew Transmitter的設計理念就是簡單易用，它集成的特色都是為盡量簡化安裝和使用服務的。該完全設置并校準的變送器首次讓露點測量變得和溫度及壓力測量一樣容易，可以直接接入到您的空氣或氣體管理及控制系統中。

兩線制電源回路連接

露點單位或 ppm 濕氣含量單位

IP66 (NEMA 4)

優異的傳感器防護

量程 -100 ~ +20°C

工作溫度 -40 ~60°C

Base Model
Easidew Transmitter EA2-TX

Order example: EA2-TX+100+HD
Easidew Transmitter, 2-wire, 4-20 mA output , measurement range -100 to +20°C (-148 to +68°F) dp, HDPE guard

Technical Specifications
Performance
Measurement range (dp) -100 to +20°C dew point (-148 to +68°F)
Accuracy (dp) ±2°C dew point (±3.6°F)
Response time 5 mins to T95 (dry to wet)
Repeatability 0.5°C dew point (0.9°F)
Electrical output/input
Output signal 4-20 mA (2-wire connection, current
source) User configurable over range
Output Dew point, moisture content in ppmV
Output range Dew point: -100 to +20°C (-148 to +68°F)
Moisture content in gas: 0-3000 ppmV
Supply voltage 12-28 VDC
Load resitance Max 250 Ω@ 12 V (500 Ω@ 24 V)
Current consumption 20 mA max
Operating conditions
Operating humidity 0–100% RH
Operating temperature -40 to +60°C (-40 to +140°F)
Operating pressure 45 MPa (450 barg / 6500 psig) max
Flow rate 1 to 5 Nl/min (2.1 to 10.6 scfh) mounted in
standard sampling block; 0 to 10 m/sec (0
to 32.8 ft/sec) direct insertion
Temperature coefficient Temperature compensated across
operating temperature range
Mechanical specification
Ingress protection IP66 in accordance with standard
BS EN 60529:1992, and NEMA 4 in
protection accordance with standard
NEMA 250-2003
Housing material  Stainless steel
Dimensions 132mm x ?27mm (5.19” x ? 1.00”)
Filter HDPE Guard <10 μm
80μm sintered guard (optional)
Mounting thread 5/8” – 18 UNF
Weight 150g (5.29oz)
Electrical connections See table
Interchangeability Fully interchangeable transmitters
Diagnostic conditions
(factory programmed)
Condition
Sensor fault
Under-range dew point
Over-range dew point
Output
23 mA
4 mA
20 mA