詢價
- 類型：高電壓試驗設備
- 輸入電壓：AC220V/230V/240V/380V
- 輸出電壓：0~1000V
- 環境溫度：－40~80（℃）
- 重量：10Kg
- 外形尺寸：480×340×134mm
- 測量范圍：10Ω~24MΩ
- 電壓測量誤差：0.1%
- 顯示方式：數字和液晶屏
- 結構型式：一體化測量設備
- 加工定制：是
一：概述
NAGKT-I型數字式高電氣儀表校驗試驗臺（也叫做：數字式多用表校驗儀、三表校驗儀）是一種LED五位數字式交、直流標準電壓、電流發生器，用于校驗數字式電表、各種指針式電表及直流0.2級，交流0.5級以下各類表頭。本儀器電壓輸出五檔（0~1000V）；電流輸出六檔（0~10A）；可以選配：中值電阻2×11檔(0Ω~24MΩ)；交流頻率50Hz,60Hz,400Hz（數字合成，按鍵選擇）。以上項目及量程變換均通過內部開關轉換。采用新的16位A/D轉換芯片，轉換速度和得到了大幅度提高；AC/DC采用真有效值轉換芯片，保證了交流輸出的；整機線性度好。采用了新型的復合大功率放大器，輸出功率強大，可靠性高，失真度小。輸出調節采用進口電位器，壽命長，調節細度高。整機采用“閉環控制”，輸出穩定度高。電壓短路、電流開路自動保護，完全符合新三表鑒定規程。
二、工作原理：
本儀器有數字合成正弦波發生器單元、功放單元、電源及保護單元、量程單元、A/D單元、顯示單元、鍵盤單元及標準電阻器等組成。
三、技術性能：
2.1性能參數：
項
目 |
量 程 |
輸 出 范 圍 |
分 辨 率 |
大 輸 出 |
精 度（23℃±2℃） |
直 流 | 500mV | 0~550.00mV | 0.01mV | 100mA |
±（讀數值×0.05%+滿量程值×0.01%） |
5V | 0~5.5000V | 0.1mV | 100mA | ||
電 | 50V | 0~55.000V | 1mV | 100mA | |
壓 | 500V | 0~550.00V | 10mV | 20mA | |
1KV | 0~1050.0V | 100mV | 10mA | ||
直 流 電 流 | 500uA | 0~550.00uA | 0.01uA | 2V | ±（讀數值×0.1%+滿量程值×0.02%）
|
5mA | 0~5.5000mA | 0.1uA | 2V | ||
50mA | 0~55.000mA | 1uA | 2V | ||
500mA | 0~550.00mA | 10uA | 2V | ||
5A | 0~5.5000A | 100uA | 1.5V | ±（讀數值×0.1%+滿量程值×0.04%） | |
10A | 0~11.000A | 1mA | 1.5V | ||
交 流 電 壓 | 500mV | 0~550.00mV | 0.01mV | 100mA |
±（讀數值×0.1%+滿量程值×0.05%）
AC I 1mA以下不考核
|
5V | 0~5.5000V | 0.1mV | 100mA | ||
50V | 0~55.000V | 1mV | 100mA | ||
500V | 0~550.00V | 10mV | 20mA | ||
1KV | 0~1050.0V | 100mV | 10mA | ||
交 流 電 流 | 500uA | ||||
5mA | 0~5.5000mA | 0.1uA | 2V | ||
50mA | 0~55.000mA | 1uA | 2V | ||
500mA | 0~550.00mA | 10uA | 2V | ||
5A | 0~5.5000A | 100uA | 1.5V | ±（讀數值×0.1%+滿量程值×0.01%） | |
10A | 0~11.000A | 1mA | 1.5V | ||
中
值
電
阻 | 示 值 | 功 率 | 精 度 | ||
10Ω、24Ω、50Ω、100Ω、240Ω 500Ω、1kΩ、2.4kΩ、5kΩ 10kΩ、24kΩ、10kΩ、24kΩ 50kΩ、100kΩ、240kΩ、500kΩ、1MΩ、2.4MΩ 5MΩ、10 MΩ、24 MΩ |
0.25W
|
±（顯示值×0.1%+10mΩ）
| |||
2.2：交流失真度：不大于1% 。
2.3：直流紋波系數：不大于0.5%；電流10A不大于3% 。
2.4：穩定性：儀器預熱一小時后，1分鐘內輸出漂移應小于基本量程滿度的±0.05%，作精密測量時需預熱2小時。
2.5：外型尺寸：480×340×134（mm）。
2.6：重量：10Kg。
NAGKT-I electrical instrument test-bed
I. Overview
NAGKT-I digital electrical instrument calibration test bench (also called: digital multimeter calibrator, three-table calibrator) is a five-digit LED AC, DC standard voltage, current generator for Calibration digital meters, a variety of hands-meter and DC 0.2, the exchange of 0.5 below the various types of table head. (0 ~ 12MΩ); AC frequency of 50Hz, 60Hz, 400Hz (digital synthesis, the output voltage of the three-phase voltage range of 0 ~ Button to select). The above items and range conversion are converted by internal switches. Using the latest 16-bit A / D converter chip, conversion speed and accuracy has been greatly improved; AC / DC converter with true RMS value to ensure the accuracy of AC output; linearity is good. Using a new type of composite high-power amplifier, the output power of strong, high reliability, low distortion. Output adjustment using imported potentiometer, long life, high fineness regulation. The machine adopts "closed-loop control", the output stability is high. Voltage short-circuit, open current automatic protection, in full compliance with the new three table identification procedures.
Second, the working principle:
The instrument has a digital synthesis sine wave generator unit, power amplifier unit, power and protection unit, range unit, A / D unit, display unit, keyboard unit and standard resistors and other components.
Third, the technical performance:
2.1 Performance parameters:
Item | Test Range | Output Range | Resolution | Max Output |
Accuracy（23℃±2℃） |
DC Voltage
| 500mV | 0~550.00mV | 0.01mV | 100mA | ±（讀數值×0.05%+滿量程值×0.01%） ±(Reading value × 0.05% + full scale value × 0.01%) |
5V | 0~5.5000V | 0.1mV | 100mA | ||
50V | 0~55.000V | 1mV | 100mA | ||
500V | 0~550.00V | 10mV | 20mA | ||
1KV | 0~1050.0V | 100mV | 10mA | ||
DC Current | 500uA | 0~550.00uA | 0.01uA | 2V | ±（讀數值×0.1%+滿量程值×0.02%） ±(Reading value × 0.1% + full scale value × 0.02%)
|
5mA | 0~5.5000mA | 0.1uA | 2V | ||
50mA | 0~55.000mA | 1uA | 2V | ||
500mA | 0~550.00mA | 10uA | 2V | ||
5A | 0~5.5000A | 100uA | 1.5V | ±（讀數值×0.1%+滿量程值×0.04%） ±(Reading value × 0.1% + full scale value × 0.04%) | |
10A | 0~11.000A | 1mA | 1.5V | ||
AC Voltage | 500mV | 0~550.00mV | 0.01mV | 100mA | ±（讀數值×0.1%+滿量程值×0.05%） ±(Reading value × 0.1% + full scale value × 0.05%)
AC I 1mA not included
|
5V | 0~5.5000V | 0.1mV | 100mA | ||
50V | 0~55.000V | 1mV | 100mA | ||
500V | 0~550.00V | 10mV | 20mA | ||
1KV | 0~1050.0V | 100mV | 10mA | ||
AC Current | 500uA | ||||
5mA | 0~5.5000mA | 0.1uA | 2V | ||
50mA | 0~55.000mA | 1uA | 2V | ||
500mA | 0~550.00mA | 10uA | 2V | ||
5A | 0~5.5000A | 100uA | 1.5V | ±（讀數值×0.1%+滿量程值×0.01%） ±(Reading value × 0.1% + full scale value × 0.01%) | |
10A | 0~11.000A | 1mA | 1.5V | ||
Middle Data Resistace | Display Data | Power | Accuracy | ||
10Ω、24Ω、50Ω、100Ω、240Ω 500Ω、1kΩ、2.4kΩ、5kΩ 10kΩ、24kΩ、10kΩ、24kΩ 50kΩ、100kΩ、240kΩ、500kΩ、1MΩ、2.4MΩ 5MΩ、10 MΩ、24 MΩ |
0.25W
| ±（顯示值×0.1%+10mΩ） ±（Reading value×0.1%+10mΩ）
| |||
2.2: AC distortion: less than 1%.
2.3: DC ripple factor: not more than 0.5%; current 10A not more than 3%.
2.4: Stability: the instrument warm-up after one hour, 1 minute output drift should be less than the full range of the basic range of ± 0.05%, for precision measurements need to warm up 2 hours.
2.5: Overall dimensions: 480 × 340 × 134 (mm).
2.6: Weight: 10Kg.
