體積表面電阻測定儀

緣材料體積表面電阻測定儀

Insulating material volume surface ristance tter

體積表面電阻測定儀（GT-121）

Volume surface ristance tter (GT-121)

電阻率測定儀

Ristivity tter

合標準：

         GB/T 1410-2006《 固體緣材料體積電阻率和表面電阻率試驗方法》

         GB / T 1410-2006 "solid insulating material volume ristivity and surface ristivity tt methods"

         ASTM D257-99《緣材料的直流電阻或電導試驗方法》

         ASTM D257-99 "DC insulation ristance or conductance tt method"

         GB/T 10581-2006 《緣材料在高溫下電阻和電阻率的試驗方法》

         GB / T 10581-2006 "insulating materials under high temperature ristance and ristivity of the tt methods"

GB/T 1692-2008 《硫化橡膠 緣電阻率的測定》

GB / T 1692-2008 "vulcanized rubber insulation ristance rate determination."

GB/T 2439-2001《硫化橡膠或熱塑性橡膠 導電性能和耗散性能電阻率的測定》

GB / T 2439-2001 "vulcanized or thermoplastic rubber conductive and dissipative ristivity measurement."

GB/T 12703.4-2010 《紡織品  靜電性能的評定  第４部分：電阻率》

GB / T 12703.4-2010 "textile electrostatic properti - Part 4: Ristivity"

GB/T 10064-2006_《測定固體緣材料緣電阻的試驗方法》

GB / T 10064-2006_ "insulation ristance of solid insulating materials - Tt methods for"

GB 1672-1988 液體增塑劑體積電阻率的測定

一、體積表面電阻測定儀概述

本儀器既可測量高電阻，又可測微電流。采用了美國Intel公司的大規模集成電路,使儀器體積小、重量輕、準確度高。數字液晶直接顯示電阻值和電流。量限從1×104Ω ～1×1018 Ω，是目前國內測量范圍寬，準確度的數字阻測量?jī)x。電流測量范圍為2×10-4 ～1×10-16Ａ。機內測試電壓為10V/50V/100V/250V/500V/1000V任意可調。本儀器具有高、顯示、性好穩定、讀數方便， 適用于橡膠、塑料、薄膜、及粉體、液體、及固體和膏體形狀的各種緣材料體積和表面電阻值的測定。本儀器除能測電阻外，還能直接測量微弱電流。

I. Overview

     The instrument can measure high ristance, but also to measure micro-current. Us the U.S. Intel Corporation LSI, so equipment is all, light weight, high accuracy. Dial LCD display directly the ristance value and current. Limit the amount of from 1 × 104Ω ~ 1 × 1018 Ω, is currently the most wide measuring range, high accuracy dial high ristance measuring instrument. Current measurement range of 2 × 10-4 ~ 1 × 10-16A. Machine tt voltage 10V/50V/100V/250V/500V/1000V adjustable. This instrument has high precision, showing rapid, good stability, easy reading for rubber, plastics, films, and powders, liquids, and solids and paste shap of various insulating materials volume and surface ristivity value determination. In addition to the instrument can measure ristance, but also directly measure weak current.

二、體積表面電阻測定儀主要特點

電阻測量范圍寬  1×104Ω ～1×1018Ω

Ristance measurement range 1 × 104Ω ~ 1 × 1018Ω

電流測量范圍為 2×10-4Ａ ～1×10-16Ａ

Current measurement range of 2 × 10-4A ~ 1 × 10-16A

體積小、重量輕、準確度高

all size, light weight, high accuracy

電阻、電流雙顯示

Ristance, current dual display

性能好穩定、讀數方便

Stable performance, easy reading

測試電壓(10V/50V/100/250/500/1000V) 測試時電阻結果直讀，免去老式高阻計在不同測試電壓下或不同量程時要乘以系數等使用不便的麻煩，使測量電阻就如用萬用表測量普通電阻樣簡便。

既能測電阻又能測微電流

All tt voltage (10V/50V/100/250/500/1000V) ristance tt rults direct reading, replacing old-fashioned high impedance meter at different tt voltag or different range when multiplied by the coefficient of trouble such as inconvenient to use, the measurement high ristance to general ristance as measured with a multimeter like simple.

High ristance measurements can measure both micro-current

三、體積表面電阻測定儀技術指標

1、電阻測量范圍： 1.0×104Ω ～1×1018Ω。

   Ristance Measuring Range: 1.0 × 104Ω ~ 1 × 1018Ω.

2、電流測量范圍為： 2×10-4A～1×10-16A

   Current measurement range: 2 × 10-4A ~ 1 × 10-16A

3、顯 示 方 式：數字液晶顯示

   Display mode: Dial LCD

4、內置測試電壓： 10V 、50V、100V、250、500、1000V

   Built-in tt voltage: 10V, 50V, 100V, 250,500,1000 V

5、基本準確度：1% (*注)

   Basic accuracy: 1% (* Note)

6、使用環境： 溫度：0℃～40℃，相對濕度<80%

  Operating environment: Temperature: 0 ℃ ~ 40 ℃, relative humidity <80%

7、機內測試電壓： 10V/50V/100/250/500/1000V 任意切換

   In Tt voltage: 10V/50V/100/250/500/1000V arbitrary switching

8、供電形式： AC 220V，50HZ，功耗約5W

   Supply form: AC 220V, 50HZ, power consumption is about 5W

9、儀器尺寸： 285ｍｍ× 245ｍｍ× 120 mm

   Instrument Size: 285mm × 245mm × 120 mm

10、質量： 約2.5KG

    Weight: about 2.5KG

四、體積表面電阻測定儀工作原理

   根據歐姆定律，被測電阻Rx等于施加電壓V除以通過的電流I。傳統的高阻計的工作原理是測量電壓V固定，通過測量流過取樣電阻的電流I來得到電阻值。從歐姆定律可以看出，由于電流I是與電阻成反比，而不是成正比，所以電阻的顯示值是非線性的，即電阻大時，電流為，即表頭的位處是∞，其附近的刻度密，分辨率很低。整個刻度是非線性的。又由于測量不同的電阻時，其電壓V也會有些變化，所以普通的高阻計是差、分辨率低。

    According to Ohm's law, the measured ristance Rx is equal to the applied voltage V divided by the current through the I. The traditional high impedance meter works by measuring the voltage V fixed by measuring the current flowing through the sampling ristor I to get the ristance value. As can be seen from Ohm's law, since the current I is inversely proportional to the ristance, rather than proportional to the ristor value displayed is nonlinear, i.e. infinite ristance, the current is zero, that the header is at zero ∞, its the scale is very close to dense, low rolution. Entire scale is nonlinear. Also, because the ristance of different measurement, the voltage V will be some variation, so the ordinary differential impedance meter is the precision, low rolution.

本儀器是同時測出電阻兩端的電壓V和流過電阻的電流I，通過內部的大規模集成電路完成電壓除以電流的計算，然后把所得到的結果經過A/D轉換后以數字顯示出電阻值，即便是電阻兩端的電壓V和流過電阻的電流I是同時變化，其顯示的電阻值不象普通高阻計那樣因被測電壓V的變化或電流Ｉ的變化而變，所以，即使測量電壓、被測量電阻、電源電壓等發生變化對其結果影響不大，其測量很高()，從理論上講其誤差可以做到，而實際誤差可以做到幾或幾。

The instrument is also measure the voltage V across the ristor and a current flowing through the ristor I, large scale integrated circuit via the internal voltage divided by current calculation completion, then the rults obtained after A / D conversion to dial display ristor value, even the voltage V across the ristor and the current I flowing through the ristor is changed simultaneously, which shows the ristance value is not as common as a rult of taking into account the measured impedance chang or voltage V and the variation of the current I, therefore, even if the measuring voltage, ristance is measured, and power supply voltage chang little effect on its rults, the measurement accuracy is high (patent), in theory the error can be zero, the actual errors can be done a few thousandths or very few.

體積表面電阻測定儀典型應用

1、測量緣材料電阻、體積電阻、表面電阻(率)

   Measuring insulation ristance, volume ristivity, surface ristance (rate)

2、測量靜電材料的電阻及電阻率

   Measuring the ristance and anti-static material ristivity

3、測量計算機房用活動地板的系統電阻值

   Measuring computer room raised floor system with ristance valu

4、測量靜電鞋、導電鞋的電阻值

   Measuring anti-static sho, conductive sho ristance valu

5、光電二管暗電流測量

   Photodiode dark current measurement

6、物理,光學和材料研究

   Physics, optics and materials rearch

體積表面電阻測定儀標準配置：

1、測試儀器：1臺

   Tt equipment: 1 set

2、電源線：1條

   Power cord: 1

3、測量線：3根（屏蔽線、測試接線、接地線）

   Measuring line: 3 (shielded wire, tt wiring, grounding wire)

4、使用說明書：1份

   Instructions: 1

備注：

本儀器配不同的測量電（夾具）可以測量不同材料（固體、粉體或液體）的體積電阻率和表面電阻率或電導率，合標準GB1410－2006固體電工緣材料緣電阻、體積電阻系數和表面電阻試驗方法，ASTM D257 緣材料的直流電阻或電導試驗方法　等標準要求。

Remarks:

The instrument is equipped with different measuring electrode (fixtur) can measure different materials (solid, powder or liquid) volume ristivity and surface ristivity or conductivity, in full compliance with the national standard GB1410-2006 solid electrical insulation materials insulation ristance, volume ristance and surface ristivity tt method, ASTM D257 DC insulation ristance or conductance standard tt methods.

五．體積表面電阻測定儀 電性能檢測試驗機列表

電壓擊穿試驗儀（10-150KV）

漏電起痕試驗儀

介電常數及介質損耗測試儀-高頻/工頻

耐電弧測試儀-微機控制/觸摸屏

電阻率測定儀