耐電痕化指數測定儀

觸摸屏-耐電痕化指數測定儀-自動型

Touch screen - resistant tester - automatic tracking index

（NLD-BI型）

(te NLD-BI)

（0-600V）

(0-600V)

耐電痕化指數測定儀滿足標準：

Meet the standard:

      IEC60112 、IEC60335、 IEC884-1、GB2099.1、UL 746A 、GB/T4207、GB4706.1  AS 3638-92等標準

IEC60112, IEC60335, IEC884-1, GB2099.1, UL 746A, GB/T4207, GB4706.1 AS 3638-92 standard

耐電痕化指數測定儀產品概述：

Produ overview:

  漏電起痕試驗（電痕化指數試驗）是在固體緣材料表面上，在規定尺寸 ( 2mm × 5mm ) 的鉑電之間，施加某一電壓并定時 (30s) 定高度 ( 35mm ) 滴下規定液滴體積的導電液體 (0.1%NH 4 CL) ，用以評價固體緣材料表面在電場和潮濕或污染介質聯合作用下的耐漏電性能，測定其相比電痕化指數 (I) 和耐電痕化指數 (PTI) 。

Tracking test (tracking index test) is in the solid insulating materials on the surface, within the specified size (2mm * 5mm) between the platinum elerode, applying a voltage and timing (30s) constant height (35mm) regulations conduive liquid droplet volume drop (0.1%NH 4 CL), is used to evaluate the solid surface of insulating material in eleric and wet or combined pollution of medium leakage resistance performance, measuring the comparative tracking index (I) and proof tracking index (PTI).

  漏電起痕試驗儀（電痕化指數試驗儀）儀適用于照明設備、低壓電器、家用電器、機床電器、電機、電動工具、電子儀器、電工儀表、信息技術設備的研究、生產和質檢部門，也適用于緣材料、工程塑料、電氣連接件、輔件行業。

Tracking test apparatus (tracking index tester) instrument suitable for lighting equipment, low-voltage elerical appliances, household elerical appliances, elerical tools, eleric motor, eleric tools, eleronic instruments, elerical instruments, information technology equipment research, produion and quality inspeion departments, is also applicable to insulation materials, engineering plastics, elerical conneors, auxiliary industry.

產品特點：

Produ features:

耐電痕化指數測定儀主控制電路系統由西門子PLC控制

The main control circuit system controlled by Siemens PLC

參數設置及操作顯示部分由7寸觸摸屏完成

Parameter setting and display part is composed of 7 Inch Touch Screen

通過觸摸屏設定參數后，自動升壓到設定的電壓值，并自動校準電流到1000MA

After the parameters set by the touch screen, automatic boost to a set voltage value, and automatic calibration of current to 1000MA

滴液大小、滴液時間間隔和滴液時間可以通過觸摸屏進行操作和設定

The drop size, drop the time interval and the dropping time can touch screen operation and setting

開始實驗后，能夠?qū)崟r采集泄露電流，并能夠動態顯示泄露電流曲線，同時滴液次數通過軟件動態同步顯示，操作簡單、直觀、使用方便。

Start after the experiment, can colle real-time leakage current, and can display the dynamic leakage current curve, at the same time drops by the number of dynamic simulation software synchronous display, operation is simple, intuitive, easy to use.

耐電痕化指數測定儀本儀器帶有排風和照明

This instrument with ventilation and lighting

本儀器使用操作方便，實驗過程直觀顯示，技術，性能卓越

This instrument is convenient operation, visual experimental process display, leading technology, excellent performance

技術參數：

Technical parameters:

1、 試驗電壓：0-600V AC

1, the test voltage: 0-600V AC

2、 電材料：電頭 — 鉑金屬（白金）

2, the elerode material: the elerode head - platinum (Platinum)

3、 電壓力：1.0±0.05N

3, the elerode pressure: 1 ± 0.05N

4、 電距離：4.0mm ± 0.01mm ，夾角 60°±5

4, elerode distance: 4.0mm ± 0.01mm, an included angle of 60 ° ± 5

5、 電電壓：100-600V（48~60HZ）可調，短路電流在1.0±0.1A時電壓下降小于10%

5, the elerode voltage: 100-600V (48~60HZ) adjustable voltage, short circuit current at 1 ± 0.1A decreased less than 10%

6、 滴液高度：為30~40mm 可調

6, the drop height: 30~40mm adjustable

7、 滴液大小：44-55滴/1cm3 可調

7, the droplet size: 44-55 drops of /1cm3 adjustable

8、 滴液時間：30s±5s，

8, dropping time: 30s ± 5s,

9、 滴液次數：可自由設定

9, the droplet number: can be set freely

10、 漏電判斷：回路電流大于0.5A并維持2秒鐘則繼電器動作切斷電流，指示樣品不合格

10, the leakage judgment: the loop current is greater than 0.5A and maintained for 2 seconds then relay aion to cut off the current, indicating sample unqualified

11、試驗過程：試驗程序自動控制，抽風

11, test: test program automatic control, independent exhaust

12、工作室體積：0.75m3（可根據不同標準定做0.5 m3 或 0.75m3 ）

12, the studio volume: 0.75m3 (can be customized according to different standards of 0.5 m3 or 0.75m3)

13、設備外尺寸：630mm寬×500mm深×1300mm高

13, equipment size: 630mm x 500mm x 1300mm wide deep high

耐電痕化指數測定儀設備配置：

Device configuration:

主機一臺

Host a

鉑金電一對

A pair of platinum elerode

9寸觸摸屏一個

A 9 Inch Touch Screen

電源線一根

A power line

距離規一個

A distance

控制系統一套

A set of control system

照明燈一個

A lighting lamp

排風扇一個

Fan a

滴液裝置一套

Dropping device of a set

耐電痕化指數測定儀，歡迎咨詢！