Item 項目 | Specification 性能 | Remark 備注 |
minal Capacity標稱容量 | 9Ah | I5A discharge(I5A放電) |
minal Voltage標稱電壓 Full charge Voltage滿充電壓 Full discharge Voltage滿放電壓 | 3.70V 4.20±0.05V 3.0V |
|
Internal Impedance內阻 | ≤100mΩ |
|
Standard Charging Rate(current/time) 標準充電率 | I5A |
|
Standard charging method 標準充電方法 | I5A CC (constant current)charge to FC,then CV(constant voltage FC)charge till charge finish current decline to ≤0.05I5A I5A CC(恒流)充電至 FC,再 CV(恒壓 FC)充電直至充電電流≤0.05I5A |
|
Charging time 充電時間 | Standard Charging (標準充電) Approx 8 hours 大約 8 小時 |
|
Max. charge current 充電電流 | Constant Current I5A Constant Voltage FC 0.1I5A cut-off 持續電流:I5A 持續電壓:FC 截止電流:£0.1I5A |
|
Charge cut-off voltage 充電截止電壓 | The same as charge protectuin voltage同過充保護電壓 |
|
Standard Discharging標準放電 | Constant current I5A end voltage FD 持續電流:I5A 截止電壓:FD |
|
Discharging Ending Voltage 放電終止電壓 | The same as discharge protectuin voltage同過放保護電壓 |
|
Recoverable capacity 恢復容量 | Constant current I5A charge to FC, then constant voltage FC charge to current declines to 0.1I5A, rest for 10min,constant current I5A discharge to FD,rest for 10min.Repeat above steps 3 times, recording the maximum capacity 先用 I5A 恒流充電至 FC,再恒壓 FC 充電直至充電電流£0.1I5A,擱置 10 分鐘,再用 I5A 電流放電至 FD; 又擱置 10 分鐘,重復以上步驟 3 次,記錄容量值 | |
Appearance 外觀 | Without distortion and leakage無變形、電解液泄露 | |
Standard testing condition 標準測試環境 | Temperature(溫度) Humidity(濕度) Atmospheric Pressure(大氣壓) | 15~35℃ 20%~80% The test field of atmospheric pressure(測試現場大氣壓力) |
長沙華耐能源開發有限公司,低溫鋰電池制造,更多產品信息詳見華耐電池工廠網站。