SAT-1AS 2M誤碼測試儀

儀表簡介：

  SAT-1AS 2M誤碼測試儀主要用于測量通信線路數據通信的誤碼率和分析線路故障的原因?？煞奖愕耐瓿蓪?duì)2M系統，N&tim;64K信道傳輸參數測量及日常維護測試。

主要特點：

l全中文菜單，大屏幕顯示，操作簡便；

l便攜設計；內置大容量電池，工作時間可達8小時以上；

l可進行多任務工作（可以邊測試邊翻閱以前的記錄）；

l9個測試設置存儲，20個測試結果存儲，并具有掉電記憶功能；

l可定時開啟、關閉進行自動測試；

l的歷史、實時告警燈設計，使您一目了然，并具有誤碼、告警功能；

l具有告警、誤碼直方圖分析；

l可將數據上傳至PC機，實現微機上存儲、打印，也可直接連接到微型打印機；

l軟件上網升級。

主要功能：

  SAT-1AS可實現的基本功能有：

l常規測試

l直通方式

l音頻測試

對2Mbit/s接口數字通道可實現中斷業務和在線誤碼測試方式，可進行以下項目的測試：

l成幀和非成幀信號發生和接收

l2Mbit/s非成幀誤碼性能測試

l2Mbit/s成幀N&tim;64kbit/s通道誤碼性能測試

l比特誤碼、編碼誤碼、幀誤碼、CRC誤碼、E比特誤碼性能測試

l信號丟失、AIS告警、幀遠端告警、復幀遠端告警、幀失步、圖案失步告警測試

l頻偏測試

l話路通道信號電平、頻率測試

l圖案滑動測試

l時鐘滑動測試

l語音

l信令狀態顯示、話路通道內容顯示、話路通道忙閑顯示

l告警、誤碼直方圖分析 

l時隙內容、幀內容分析

lG.821、G.826、M.2100誤碼性能分析

l多種誤碼和告警

l三種輸入方式（終接、橋接、監測）

l兩種時鐘選擇（內部、提?。?/span>

技術指標：

●2M技術指標

（1） 信號輸入速率： 2048kbit/s&plun;50ppm（G.703要求&plun;100ppm）

（2） 信號編碼：     HDB3、AMI

（3） 輸入抖動容限： 合G.823

（4）阻：非平衡 75Ω 合G.703

平衡 120Ω 合G.703

（5） 信號結構：

（5.1）非幀結構

（5.2）幀結構：PCM30、PCM31、PCM30CRC、PCM31CRC

幀結構合G.704要求

（6） 測試圖案：2⁶-1、2⁹-1、2¹¹-1、2¹⁵-1、2²⁰-1、2²³-1、人工碼

（7） 誤碼：BIT誤碼、幀誤碼、圖案滑動碼；無，單個，比例10-1～10-7

（8）告警：無信號、幀丟失、AIS、圖案丟失

其它參數：

●供電：

（1）本儀表電源適配器

INPUT:AC220V 50Hz

OUTPUT:DC 9V1.2A

（2）儀表內部充電電池

≥4000mAh 6V鎳氫可充電電池

工作時間：8小時

充電：關機時充電8小時；開機時充電12小時

●打印機（可選）：μP40-TS(CH)標準電平串口漢字微型打印機

●尺寸和重量：

長&tim;寬&tim;高：220&tim;162&tim;48mm

重   量： 950g

●環境參數：

操作溫度： -10～+50℃

儲藏溫度： -30～+70℃ 

濕 度： 5%～90%非凝結

Major Featur

·           LCD large-screen display, 320*240 lattice, backlight, LED indicator

·           Hand held, auto configuration

·           Multi-task operation at one time

·           Store 20 tt rults and 9 tt configurations, with power-off memori

·           PC operation, store, ysis, print

·           Programmable timer

·           Alarm and histogram ysis

·           Software updating

Major Functions

For 2Mbit/s:

·           Service-interrupted error tting

·           Online error tting

·           Framed and unframed signals generating and receiving

·           2Mbit/s unframed error performance tting

·           2Mbit/s framed N&tim;64kbit/s channel error tting

·           Bit error, coding error, frame error, CRC error and E bit error tting

·           Signal loss alarm, AIS alarm, framed remote alarm, multi-framed remote alarm, out-of-frame, and pattern loss alarm

·           Frequency offset tting

·           Line signal level and frequency tting

·           Voice channel signal level and frequency tting

·           Pattern slip tting

·           Clock slip tting

·           Straightforward signaling

·           Audio frequency tting

·           Loop circuit delay tting

·           Automatic protection switching time tting (APS)

·           Clock bias function

·           Sound monitoring

·           Duplex 2Mbit/s detecting and monitoring

·           Signal state display. Voice channel content display. Voice channel busy indication

·           Alarm and error histogram ysis

·           Time slot content ysis, drop and insert signal on each time slot

·           Framed content ysis

·           G.703 Template ysis

·           G. 821/G. 826/M. 2100 error ysis

·           Multi error and alarm inserting

·           Three input mod (terminating, bridging and monitoring)

·           Three clock options (internal, external and picking-up)

·           Jitter tting function

·           Touch screen TFT color LCD (optional)

* The functions of yellow fonts dcription is a module for user to select.

For Datacom:

·           V.24/RS232/V.28, V.35, V.36, X.21, RS-449, RS-485, RS422, EIA-530, EIA-530A datacom tting

·           SYNCH and ASYNCH tting

·           DTE and DCE emulation

·           Bit code tting

·           Pattern slip tting

·           Signal loss alarm

·           Line signal level and frequency tting

·           Loop delay tting

·           Automatic protection switching time tting(APS)

·           G.821, M2100 service interrupt error tting

For co-directional 64Kbit/s:

·           Service interrupt error tting

·           Bit code tting

·           Pattern slip tting

·           Signal loss, AIS alarm

·           Line signal frequency tting

·           Loop delay tting

·           Automatic protection switching time tting(APS)

·           G.821, M.2100 error tting

Technical Index

·          2Mbit/s Technical Index

(1)        Signal input rate: 2048kbit/s &plun; 100ppm (G.703 requirement&plun;50PPM)

(2)        Signal code: HDB3, AMI.

(3)        Input jitter tolerance: Up to the requirement of Figure 10.1.

Fig.10.1  Input Jitter Tolerance

(4)       Input balance rponse: attenuation compli with the law of square root of frequency, and is within the range of 0 to 6dB at 1024 kHz.

(5)       Input Impedance

(5.1)  Unbalance terminating: 75W

Balance terminating: 120W

Reflection loss >18dB within 50Hz~3100kHz

(5.2)  Unbalance bridging: >750W

Balance bridging: >1200W

(5.3)  Unbalance monitoring: 75W, 26dB gain

Balance monitoring: 120W, 26dB gain

Reflection loss >18dB within 50Hz~3100kHz

(6)       Signal structure

(6.1)  Unframed structure

(6.2)  Framed structure: PCM30, PCM31, PCM30CRC, PCM31CRC

Framed structure compli with the requirement of G. 704

(7)       Tting pattern: 2⁶-1, 2⁹-1, 2¹¹-1, 2¹⁵-1, 2²⁰-1, 2²³-1, and artificial code

(8)       Impedance of output interface:

(8.1)  Unbalance 75W, up to G. 703

(8.2)  Balance 120W, up to G. 703

(9)       External clock input

(9.1)  Signal form: HDB3, NRZ

(9.2)  Balance terminating ristance: 120W

Unbalance terminating ristance: 75W

Balance bridging ristance: >1200W

Unbalance bridging ristance: >750W

(10)    Error code insertion: None, single, or ratio 10-1~10-7.

·           Co-directional64k Technical Index

(1)       Signal input rate: 64kbit/s &plun; 100ppm(G.703 requirement&plun;100PPM)

(2)       Input impedance: Balance 120W, up to G.703

(3)       Input jitter tolerance: Up to G.823.

(4)       Impedance of output interface: Balance 120W, up to G.703

(5)       Tting pattern: 2⁶-1, 2⁹-1, 2¹¹-1, 2¹⁵-1, 2²⁰-1, 2²³-1, and artificial code

·          Datacom Index

(1)        Data interface te: V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530 and EIA-530A.

(2)        Generator

(2.1)  SYNCH mode

Clock source: Internal or external clock

Phase relation between clock and data: co-direction or reverse direction.

Rate: 1.2, 2.4, 4.8, 9.6, 14.4, 19.2, 38.4, 48, 56(kbps), N&tim;64kbps (N=1~32)

Error: &plun;15ppm (ppm: parts per million)

(2.2)  ASYNCH mode

      Rate: 50,75,110,150,200,300,600,1200,2400,3600,4800,7200,9600; 14.4k,19.2k,38.4k,57.6k(bps)

Data structure: Word length: 5, 6, 7, 8(bits)   S bit: 1, 2(bits)

Odd-even check: odd, even, 1, 0, none

(2.3)  Error code insertion: None, single, or ratio 10-1~10-7.

(3)        Receiver

(3.1)  SYNCH mode

Clock source: Internal or external clock

Phase relation between receive clock and receive data: Equidirection or reverse direction.

Clock Rate: 2048kbps at a maximum

(3.2)  ASYNCH mode

      The rate and data are the same as those of the generator.

(4)        Tting pattern: 2⁶-1, 2⁹-1, 2¹¹-1, 2¹⁵-1, 2²⁰-1, 2²³-1, and artificial code

Other Parameters

·           Power supply

(1)        Special power adapter

Input: AC220V 50Hz

Output: DC 9V 1A

(2)        Internal rechargeable battery

4000mAh, 6V nickel-hydrogen rechargeable battery

Working time: 8 hours

Charging: 8 hours at power-off state, and 12 hours at power-on state

·           Dimension and weight

L&tim;W&tim;H: 200&tim;160&tim;42mm

Weight: 950g

·           Ambient parameters

Operation temperature: -10~50℃

Storage Temperature: -30~+70℃       

Humidity: 5%~90%, non-condensing

Standard Configuration