一、產品概述：
Produs overview:
華測新型高電壓起痕試驗儀為華測公司2013年重點科研產品之一，新的高壓漏電試驗儀采用西門子控制系統更高，擯棄了現有的低壓切斷原原理，采用的高壓真空切斷技術，使試驗過程更加合理。采用5組高電流傳感器用以控制每組試驗的高壓切斷，使數據采集更加，同時本設備采用電力系統過壓過流保護裝置，使儀器更加。
Mark since China test the new te of high voltage tester for China test company in 2013, one of the key research produs, new high pressure leakage tester adopts Siemens control system accuracy is higher, away from the original principle of the existing low voltage cut with unique high-pressure vacuum cut technology, make the test process more reasonable. Using 5 groups and high precision current sensor is used to control high voltage test in each group is cut off, the more accurate data colleion, at the same time, this equipment adopts the power system over-voltage over-current proteion device, make the instrument more secure.
二、合標準：
Second, conform to the standard:
高壓漏電起痕試驗機適用于對電工電子產品、家用電器及其材料進行耐電痕化和蝕損的試驗，模擬在工頻（48Hz - 62Hz）下，用液體污染物和斜面試樣，通過耐電痕化和蝕損的測量評定在嚴酷環境條件下使用的電氣緣材料的耐電痕化和蝕損等級。本機是嚴格按照GB/T6553-2003 及 IEC60587-1984設計制造。
High pressure tracking tester applies to elerical and eleronic produs, household elerical appliances and materials for eleric mark and erosion test, simulation in power frequency (48 hz - 62 hz), with liquid pollutants and cant specimen, by measuring eleric mark and erosion evaluation in harsh environmental conditions using the elerical insulation of eleric resistance and erosion grade. This machine is in stri accordance with the GB/T6553-2003 and IEC60587-2003 design and manufauring.
三、技術指標
Third, technical indicators
1、電：厚0.5mm 材質：不銹鋼；
2、上下電距離：50.0mm±0.1；
3、試驗電壓：100V-6000V；
4、調壓器：輸出：0～250V可以調，容量5KVA；
5、試驗變壓器：容量5KVA，輸出電壓AC6000V（或DC6000V可選）；
6、高穩壓器：輸出AC220V 功率6000W，±1%；
7、回路電流為60mA時，切斷電壓輸出；
8、試驗時間：6小時；
9、滴液：0.5%；
10、電壓穩定度：±1%；
11、起痕判斷：
依標準GB/T6553-2003/4.1.2規定，在試樣上施加電壓（2.5k V,3. 5k V和4.5k V），并以流速滴污染液，在60mA以下的電流持續6H不過流即為通過。
12、滴液裝置：
采用雷弗精密蠕動泵，流量范圍0.00185 ～20毫升/分鐘，工作轉速0.1～50轉/分鐘，流量誤差：＜0.5%；（根據試驗電壓自動控制）
13、輸出電壓：交流/直流（可切換）
14、實驗組數：五組 15、控制裝置：采用西門子PLC+臺灣威綸觸摸屏控制，控制精密，操作簡單，設計人性化，試驗結束自動生成，面板熱敏打印機可以適時打印試驗結果； 15、工作室體積：900L*650W*950H(mm)；容積為0.56m3。
15、污液槽采用316不銹鋼，加裝密閉裝置。
1, the elerode: 0.5 mm thick material: stainless steel;
2, and bottom elerode distance: 50.0 + / - 0.1 mm;
3, test voltage: 100 v to 6000 v;
4, voltage regulator: output: 0 ~ 250 v can be adjustable, 5 kva capacity;
5, test transformer: 5 kva capacity, the highest output voltage AC6000V (or DC6000V optional);
6, high precision voltage regulator: the output AC220V power 6000 w, plus or minus 1% accuracy;
7, the loop current is 60 ma, cut off voltage output;
8, test time: 6 hours;
9, accuracy: 0.5%;
10, voltage stability: + / - 1%;
11, the mark:
According to the provisions of the standard GB/T6553-2003/4.1.2 and applied voltage on the sample (2.5 k V, 3. 5 V k and 4.5 k, V), and pollution drops at a certain velocity, under 60 ma eleric current to flow for 6 h but is through.
12, device:
By trevor precision peristaltic pump, flow range 0.00185 ~ 20 ml/min, work speed 0.1 ~ 50 RPM, flow precision error: < 0.5%; (according to the test voltage automatic control)
13, the output voltage, ac/dc (switch)
14, the experimental group number: 5 groups of 15, control device: Siemens PLC + Taiwan wei lun touch-screen control, control precision, simple operation, fully humanized design, automatically generated report the end of the test panel thermal printer can print test results timely; 15, studio volume: 900 * 950 * 650 w h l (mm); Volume of 0.56 m3.
15, dirty tank adopts 316 stainless steel, equipped with airtight device.
