品牌	美國ATI	型號	TDA-4B 氣溶膠發生器
類型	呼吸性粉塵采樣儀

TDA-4B
氣溶膠發生器

 

     - 這是一款新型的Tda-4B體積還小并價格低廉的氣溶膠發生器。即適用于HEPA的過濾性能試驗，也適用于使用塵埃粒子計數器進行的泄漏試驗，只需要提供清潔的壓縮空氣即可進行工作。具有三個調節閥，通過調整調節閥即可實現所發生浮游濃度的調整。  技術參數： 

可使用的流量范圍	50～8,100cfm (1.4-229m2min)
發生濃度	10ug/L： 流量8,100cfm(約230m2/min時)
	100ug/L：流量810cfm(約23m2/min時)
測試	100ug/L：流量810cfm(約23m2/min時)
發生粒子	PAO、DOP、多分散
發生方法	1-6Laskin Nozzles
壓縮氣體	3-18cfm (85-510L/min) 20psi (0.14Mpa)
電 源	不需要
外形尺寸	約280x230x250mm
重量	約7.3kg

 **適用20psi（0.14Mpa）的壓力時 注：不建議采用DOP  英文詳細介紹： Description

ATI manufactures portable Laskin nozzle aerosol generators which produce a sub-micron polydispersed oil mist aerosol in concentrations from 10 to 100 micrograms per liter (ug/l) at air flows from 50 to 8,100 cfm.

Aerosol generators and photometers are used to integrity test or locate leaks in high efficiency air filtration systems. Filter manufacturers use this equipment to scan ULPA and HEPA filters to verify they are free from manufacturing defects. Filter certifiers use this equipment to insure that filters were not damaged in shipping and have been installed properly, eliminating any leakage.

With the proper generator and photometer combination, filter deficiencies such as pinholes, thin spots, gasket leaks, frame leaks or seal problems can be quickly and quantifiably pinpointed and corrected thus protecting product and personnel.

Both the TDA-4B and the TDA-4BLite feature several improvements including rugged stainless steel construction, large fill port, individual nozzle control, and a 3" standard sanitary outlet fitting. An optional hose adapter, part #, is available for introducing the aerosol into positive pressure systems.

Features

The TDA-4B is the latest design in rugged, lightweight Laskin nozzle generators from ATI. The TDA-4B is a small, compact aerosol generator which requires only a supply of clean, compressed air to create polydispersed sub-micron oil aerosol.

The TDA-4B has 6 Laskin nozzles. Three valves permit the unit to be operated with 1 to 6 nozzles, providing a wide range of aerosol concentrations.

The TDA-4B is recommended for testing systems with air flows of 8,100 cfm and lower. It is ideal for work stations, Negative Pressure Filtration Units, biosafety cabinets, ceiling modules, small or portable cleanrooms, or HEPA filter units in installations where an adequate supply of clean, compressed air is readily available.

 

TDA-4B SPECIFICATIONS

• Aerosol Output Range: 50-8,100 cfm
• Aerosol Concentration 100 ug/l @ 810 cfm*
• Aerosol Concentration 10 ug/l @ 8,100 cfm*
• Generator Type: 1 to 6 Laskin Nozzles
• Compressed Air: 3 to 18 cfm @ 20 psi
• Aerosol Type: Polydispersed (Cold)
• Size: 10" L ?11" W ?9" H (25cm L ?28cm W ?23cm H)
• Weight-Pounds (lbs): 16 lbs.
• Weight-Kilograms (kg): 7.3 kg
• Electrical: (Not Required)

Applications

• Clean Rooms
• Laminar Flow Benches
• Biosafety Cabinets
• Glove Boxes
• HEPA Vacuum Cleaners
• HVAC Systems
• HEPA Filters
• ULPA Filters
• Negative Pressure Filtration Units
• Surgical Suites
• Nuclear Filter Banks
• Collective Protection Filters

Research and Development

Industries

• Pharmaceutical
• Food Processing
• Veterinary Medicine
• Laboratories
• Asbestos Abatement
• Heavy Metal Processors
• Nuclear Power and Fuel
• Hospitals
• Chemical Processing
• Certifiers
• NBC Defense Agencies
• Governmental Labs
• Filter Manufacturers
• Micro Electronic
• Electronic
• Biotechnology
• Micromechanics

*If more than 20 psig is used, the output concentration will increase and conversely,

if less than 20 psig is used, the output concentration will decrease.

* If using more than 2 nozzles, upstream concentration should be measured